Murray Lawn Tractor Bearings

This is a genuine OEM part made for Craftsman lawn tractors and mowers. Bearings are used to buffer moving parts from damage due to friction. They also stabilize directional movement. Bearings are high-wear parts and are changed regularly. This metal bearing is sold individually. Gauges, washers, rings, etc. sold separately.

The thrust washer fits next to the ring and the 16 gauge washer. This is an authentic Craftsman replacement part used in compatible lawn tractors. This item is priced as an individual replacement. It is made of metal and may require a pair of pliers during the replacement of this part if it becomes broken.

Genuine Manufacturer Approved replacement part designed for Riding Lawn Tractors and it has several applications. This Flange is made out of Metal and it is Sold Individually. One side is Flat like a washer and the other side is Hexagon shaped. Requires a Wrench to tighten or loosen.

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure,...

This is a Genuine Manufacturer Sourced replacement part used on Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to...

This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn Tractors. This part is Sold Individually. This item helps to secure Axle Assembly to the Pivot Axle. This also helps Axle to move freely and effortless. Due to constant use and pressure being put on this part it would need to be inspected periodically and replaced if its showing signs of wear.

This part is made out of metal. The bushings fit between the steering shaft and the steer plate and help to support both parts. If these parts become broken they will need to be replaced and may require a socket set and a wrench set during the installation. They are genuine OEM sourced parts which are specifically designed for use with ride mowers by Husqvarna, Poulan, and Weed Eater.

This genuine OEM part is compatible with a variety of Snapper, Simplicity, and Murray tractors/mowers. Bearings allow moving parts (axles and wheels in this case) free motion and steady operation. They stabilize directional motion while reducing friction between moving parts. Bearings are high wear parts which often need regular replacement to function at their peak. Sold separately.

This is an authentic part produced by original manufacturer. It is used in various tractors and lawn mowers built by Murray, Snapper, and Simplicity. Ball bearings mainly serve to hold and buffer moving parts, reducing friction. They also assist in keeping parts moving in the correct position. Therefore, they are high wear items with regular replacement needs. Sold individually.

This is a genuine replacement part produced by original manufacturer. It is used in various tractors from MTD, Yard Machines, Bolens, and Yard Man. Flange bearings facilitate spinning axles/shafts and reduce friction. They are a very high wear item that may require replacement often. Sold individually.

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part diagram to confirm the bearing\\\'s compatibility. This item is...

This nylon king pin bushing/bearing is a genuine OEM approved replacement part. It is commonly used on riding lawn mowers/tractors. This is the item which fits the spindle king pin and allows it to move freely. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Includes one (1) nylon bearing per order. To comple...

This is a genuine Murray replacement part, it is sold individually. The 091334MA Bushing /Bearing is installed in the front wheel of the Murray Lawn Tractors shown below. There are two of the parts per wheel. One is installed on the outside of the wheel the other is installed on the inside of the wheel. Once they are installed the wheel, it can be positioned on to the left or right spindle assembly.

This is a plastic replacement part made for Snapper and Murray machinery. It is made by the original manufacturer. This type of bearing is used to separate parts to reduce friction and wear on those parts. Therefore, this is a common and easy repair.

This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to be replaced if it becomes broken. A screwdriver, a set of pliers, and a wrench set may all be needed to help replace this part. This item is sold individually.

This part is priced as an individual replacement even though two may be needed. The flange ball bearing attaches to the front wheel, one on each side. It is made of metal and may require a set of pliers during replacement if this part breaks. This is a genuine Snapper replacement part that is sourced from the original manufacturer for use with rear engine rider mowers.

This is an authentic replacement part manufactured for use with riding lawnmowers. The PTO bearing is used to reduce friction between the PTO lever and the frame. This bearing is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. This is a high-quality replacement for a missing or damaged spacer bearing that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hard...

This is an authentic Simplicity replacement part. The bushing is designed by the manufacturer for use in lawn tractors. This part is made of metal, and is placed in the axle assembly to allow the components to swivel easily. You may require a wrench when replacing this part. This item is sold individually.

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to the appropriate diagrams for your model to ensure the proper r...