Murray Lawn Mower Control Cables

This control cable is designed for walk-behind lawn mowers to safely engage and disengage the blade during operation. Constructed with a durable metal inner cable and a protective rubberized outer sheath, it transfers motion from the control handle to the braking mechanism. When the control handle is released, the cable activates the blade brake to stop the blade quickly for added safety. Replacin...

This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized protective cover, and a plastic mounting clip. This essential component connects the control handle to the engine brake system, stopping the blade when the handle is released to ensure safe operation. ...

This cable is an original part from Craftsman for lawn tractors. This part pivots and pulls the belt idler pulley to fasten the belt and spins the cutting blades. It is recommended that you wear gloves before installing this part. You will need a pliers and a screw driver to replace this part. This cable is made of made of rubber, metal, and wire components.

This is an authentic replacement part that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. The drive cable stops the engine when a user lets go of the operator presence handle. When the brake cable is damaged or broken, the mower becomes temporarily inoperable requiring a replacement cable. Please note this high-quality durable rubber insulated cable is sold individually.

This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pressed, the cable activates the blade rotation; releasing the handle stops the blade, ensuring operator safety. This specific part features a 40-inch covered housing with a total cable length of 53 ...

This is a genuine item is supplied by the original equipment manufacturer for use with Poulan rotary lawn mowers. It is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make...

This control cable is specially designed for use with walk-behind lawn mowers. It is supplied by the original equipment manufacturer. The cable is utilized to engage the blade. This part is connected to the control handle, over time it may wear out or get damaged eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the exact location and the...

Genuine OEM replacement part, this item is sold individually. The Engine Control Cable connects to the Control Bar and to the Engine. The Control Bar has to be pulled up for the Engine to start. Once you let go of the Control Bar the Engine Control Cable will cause the Engine to stop running.

This is a genuine replacement component which is supplied directly from the original equipment manufacturer for use with walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. Please note this high-quality rubber insulated metal cable is sold individually.

The engine zone control cable stops the blade when the control handle is released on walk-behind lawn mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed. This is a genuine OEM sourced replacement part that is designed for use with lawn mowers. Please note this durable metal rubber insulated cable is sold individually.

This authentic replacement part is supplied directly from the original equipment manufacturer for use on Murray and Snapper walk-behind lawn mowers. The cable stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. Keep in mind this high-quality rubber insulated component is sold individually. Refer to the o...

This is an authentic OEM sourced item which is specially produced for use with Murray lawn mowers. The cable attaches to the propelled bail handle. A screwdriver may be needed during the replacement of this part. This part will need to be replaced if it breaks. It is made of metal and plastic and is sold individually.

This is an authentic manufacturer made replacement part which is specially designed for use with MTD, Troy-Bilt, and Yard Machines lawn tractors. The throttle cable controls the engines speed. This part is made of metal and is sold individually. For installation you will need a wrench and screw driver. Make sure that the engine has cooled before you start the repair.

This is a genuine OEM part which is made for use with Murray and Briggs and Stratton lawn mowers. It is the cable that engages the gear case to drive the equipment. Over time it may wear out or get damaged eventually requiring a replacement. Make sure to refer to the owner's manual and the appropriate diagrams for your model to ensure the correct repair procedure. Note, this high-quality rubber in...

S-cbl-c 42.00 20rbp c

This is an original Snapper replacement part. The bail cable is designed by the manufacturer for use in lawn mowers. This part is a metal cable in a flexible plastic casing, which is used to connect the bail handle control with the engine. You may require a wrench when replacing this item. This part is sold individually.

This zone control cable is designed for walk-behind lawn mowers to manage the operator-presence safety system. It connects the handle control to the engine, allowing the mower to run while engaged and automatically shutting the engine off when the handle is released. Built for smooth movement and reliable response, it’s a practical replacement for restoring proper safety function and dependable st...

Cable bail 22 wbm

This genuine OEM replacement part is used on walk behind/push mowers. This cable consists of a metal wire cable with z-type bent ends and rubberized cover/body. The control cable stops the blade when the control handle is released on walk-behind mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed. You may need pliers to complete this repair. • F...