Murray Lawn Mower Bearings

This part is from original manufacturer. It is found in many models of Craftsman lawn tractor. This bearing fits between the rim and tire. A bearing secures a moving part for correct directional movement while allowing rotation. Because bearings are high-wear parts, it is not unusual to replace them often. This flange bearing is sold individually.

Genuine Husqvarna replacement part, this item is sold individually. This bearing is installed on top of the shaft which is encased in the mandrel assembly. The mandrel assembly is bolted to the mower deck. The shaft of the mandrel assembly is what the blade on all of the riding mowers listed below is attached to.

This is a genuine OEM part made for Craftsman lawn tractors and mowers. Bearings are used to buffer moving parts from damage due to friction. They also stabilize directional movement. Bearings are high-wear parts and are changed regularly. This metal bearing is sold individually. Gauges, washers, rings, etc. sold separately.

Genuine Manufacturer Approved replacement part designed for Riding Lawn Tractors and it has several applications. This Flange is made out of Metal and it is Sold Individually. One side is Flat like a washer and the other side is Hexagon shaped. Requires a Wrench to tighten or loosen.

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure,...

This is a Genuine Manufacturer Sourced replacement part used on Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to...

This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn Tractors. This part is Sold Individually. This item helps to secure Axle Assembly to the Pivot Axle. This also helps Axle to move freely and effortless. Due to constant use and pressure being put on this part it would need to be inspected periodically and replaced if its showing signs of wear.

This genuine OEM part is compatible with a variety of Snapper, Simplicity, and Murray tractors/mowers. Bearings allow moving parts (axles and wheels in this case) free motion and steady operation. They stabilize directional motion while reducing friction between moving parts. Bearings are high wear parts which often need regular replacement to function at their peak. Sold separately.

It is a genuine manufacturer-sourced item that is supplied by the original equipment manufacturer for use with DeWALT power tools. This is an identical replacement for a missing or damaged bearing assembly that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part ...

This is an authentic part produced by original manufacturer. It is used in various tractors and lawn mowers built by Murray, Snapper, and Simplicity. Ball bearings mainly serve to hold and buffer moving parts, reducing friction. They also assist in keeping parts moving in the correct position. Therefore, they are high wear items with regular replacement needs. Sold individually.

This is a genuine replacement part produced by original manufacturer. It is used in various tractors from MTD, Yard Machines, Bolens, and Yard Man. Flange bearings facilitate spinning axles/shafts and reduce friction. They are a very high wear item that may require replacement often. Sold individually.

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part diagram to confirm the bearing\\\'s compatibility. This item is...

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered, Poulan and Ryobi. This part allows the rod to swivel smoothly when the wheels are turning. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable material and sold individually.

This is a genuine Murray replacement part, it is sold individually. The 091334MA Bushing /Bearing is installed in the front wheel of the Murray Lawn Tractors shown below. There are two of the parts per wheel. One is installed on the outside of the wheel the other is installed on the inside of the wheel. Once they are installed the wheel, it can be positioned on to the left or right spindle assembly.

This is a genuine manufacturer-approved replacement part which is specially designed for Snapper and Simplicity lawn and garden equipment. Bushings are generally utilized to provide a tight fit between connected components while allowing for movement with minimum friction. If the bushing is damaged or is missing, this will provide an identical replacement for the original hardware that was install...

This is a genuine replacement part for tractors made by Snapper, Murray, and Simplicity. The bushing fits between the washer and the mounting steering plate. It is made out of plastic and will need to be replaced if it becomes broken. A screwdriver, a set of pliers, and a wrench set may all be needed to help replace this part. This item is sold individually.

This nylon bearing is an OEM part direct from Poulan. Compatible with many lawn and garden tractors, the bearing helps to secure the roll pin to the pedal cover. This item is sold individually, and a wrench is required for making the replacement.

This is an authentic replacement part manufactured for use with riding lawnmowers. The PTO bearing is used to reduce friction between the PTO lever and the frame. This bearing is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. This is a high-quality replacement for a missing or damaged spacer bearing that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hard...

This is an authentic Simplicity replacement part. The bushing is designed by the manufacturer for use in lawn tractors. This part is made of metal, and is placed in the axle assembly to allow the components to swivel easily. You may require a wrench when replacing this part. This item is sold individually.