Lawn Boy Lawn Mower Springs and Shock Absorbers

This item is a genuine Toro replacement part that has been OEM sourced and is intended to be used with walk-behind lawnmowers. The metal spring is used to keep the side discharge chute in the down position pressed against the deck. This item is available as an individual replacement part.

This manufacturer approved recoil starter pulley is designed for lawn and garden equipment engines. The recoil starter engages the drive cup on the flywheel to start the engine when pulled. This assembly includes: Plastic Pulley and a Metal Recoil Spring.

This is a Genuine OEM replacement part used on Toro Lawn Mowers. This is a Metal Spring and it is Sold Individually. The spring moves the key up and down. When the key moves down on the drive axle you are able to reverse the machine. When the key moves up, it will engage the drive system. Over time springs may loose its tension and may not function as intended. If this part is lost or damaged it must be replaced.

This is a genuine OEM sourced component which is specially designed for use with Toro lawn and garden equipment. This is a special hardware that is secured on the transmission shaft. It is an identical replacement for a missing or a faulty item that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this comp...

This is a manufacturer approved replacement part designed for use with a variety of lawn and garden engines. The air vane spring maintains the proper tension on the air vane choking system. If it is broken, it can cause the engine to not start. To replace it you will need pliers.

This governor spring is an OEM part direct from Briggs & Stratton. Compatible with many small, lawn and garden engines, the metal spring creates the necessary tension for the throttle. This in turn, manages the speed of the engine. A pair of pliers and a screwdriver are needed for the installation. The governor spring is sold individually.

This rear arm spring is a genuine OEM replacement designed for Toro and Lawn-Boy walk-behind lawn mowers. It is part of the rear height-of-cut adjustment system, providing the tension needed to keep the rear wheel arms balanced and the mowing height securely set during operation. Manufactured for durability and proper spring tension, it’s an ideal replacement when corrosion, fatigue, or loss of te...

This item is has been OEM sourced to ensure a high level of quality. The metal throttle spring is intended to be used with lawnmower engines from Toro and Lawn-Boy. The throttle spring attaches to the carburetor under the airvane adjustment collar. This item is used to maintain the position of the throttle disc and to return it after the throttle is opened. This item is sold as a single part.

This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The extension spring is part of the deck assembly. This item is used to link the cable and the idler extension to engage the idler pulley to allow the belt to drive the blades. This item is sold as an individual replacement part.

This is an original Toro replacement part. The rear spring arm is designed by the manufacturer for use in lawn mowers. This part is made of metal, and is used to adjust the height of the mower deck. You may require a wrench when replacing this item. This part is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Toro and Lawn Boy lawn mowers. This is an identical replacement for a missing or a faulty arm-spring that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the exact location and application of this part. Keep in mind this high-quality arm-...

This is an authentic manufacturer-sourced part which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or damaged spring that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind t...

This choke return spring is an OEM direct from Briggs & Stratton. The metal spring is compatible with several small engines. This component works from the choke system, applying the necessary tension to maintain the choke lever position. A screwdriver, wrench and pair of pliers are often required for the repair. The choke return spring is sold individually.

The rear door spring attaches to the rear door assembly. This part is an original part from Toro and Lawn Boy for use in lawn mowers. This item is sold individually and is made of metal. It might require a socket set to replace this part if it becomes broken.

This is a genuine Briggs and Stratton part that has been OEM sourced to ensure a high-level of quality. The metal governor spring is intended to be used with small engines. This spring is used to return the throttle lever after a change in the motor's output based on the load controlled by the governor. This item is available as an individual replacement part.