Husqvarna Lawn Mower Wheels and Rollers

This genuine Craftsman hex gauge wheel is a replacement part sourced directly from the original manufacturer and is designed for use with riding lawn mowers. It attaches to the mower’s deck assembly and helps support the deck while providing traction, preventing it from making direct contact with the ground during operation. This helps maintain an even cut and protects both the deck and the lawn. ...

This is a genuine OEM sourced replacement part is used with walk behind lawn mowers. This is the drive wheel which has plastic gears on the inside. It is designed to be driven by a pinion gear which is sold separately. If the wheel is broken or damaged it should be replaced to ensure smooth ride and consistent cut of the grass. Includes one (1) plastic wheel.

This is a genuine Husqvarna replacement part, sold individually. Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part. This part is compatible with the Husqvarna lawn mower models that are listed below.

This is a Genuine OEM replacement part used on Ride Mowers/Lawn Tractors. This is the Wheel that helps to support the Deck and allows it to move around easier. This Wheel is made out of Plastic and it is Sold Individually. Please note the Bolt and Nut used to secure this Wheel are Sold Separately. To replace this item you would need a Wrench.

This replacement wheel is a genuine manufacturer sourced item that is specially produced for Husqvarna lawn mowers. This is the rear drive wheel that is driven by the transmission assembly. It is made from durable plastic and it is sold individually. Please note that the hardware to secure it, gears, and other parts are all sold separately.

This is a genuine Husqvarna and Poulan part for use with Lawn Tractors. The steering shaft kit contains the parts needed to connect the steering wheel to the sector gear. The most common reason for replacing the steering shaft is when the steering wheel will not turn the mower. Here is a list of tools that are needed to install the steering shaft are a 3/4" socket, mallet, 3/8" socket, floor jack,...

This is an authentic OEM sourced replacement wheel and tire assembly. It is commonly utilized on walk-behind lawn mowers. This is the front drive wheel that helps to move the mower around. This wheel assembly is made from durable plastic material and it is sold individually. Please note, the hardware to secure this item is sold separately. To replace this wheel assembly you would need a wrench. Re...

The is a genuine OEM part. The rear wheel & tire assembly is compatible with many Husqvarna lawn mowers. This component is fitted on the shaft assembly, between the washer and the flangelock hex nut. The rear wheel constructed of durable plastic and rubber. A socket set is required for making the replacement.

This is a genuine OEM sourced replacement part used on lawn mowers. This is the front wheel that helps to move your mower around. This wheel is made out plastic and it is sold individually. To replace this wheel you would need a wrench. • Remove the hub cap and the locknut • Replace the old wheel with the new one • Secure it with a nut and a hub cap

This genuine Craftsman shaft assembly is an original replacement part sourced directly from the manufacturer and is designed for use with riding lawn mowers. It fits into the mandrel housing and serves as a critical connection between the mower blade and the pulley, allowing for smooth and efficient power transfer. This part is sold individually and is ideal for restoring proper function to your m...

This is a genuine manufacturer approved item. It is supplied directly from original equipment manufacturer for use with walk-behind lawn mowers. It allows unit to be mobile for easy movement/transportation. This wheel is made out of plastic and it is sold individually. Please note, the axle bolt and the washer that secures this wheel are sold separately. A wrench will be needed to replace this wheel.

This item is an authentic Husqvarna replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The nose roller attaches to the leading edge of the mower's deck and is used to prevent the deck from running into the ground. The roller is priced as a single item.

This authentic manufacturer-supplied part is specially designed for use with riding lawn mowers and garden tractors. It is a special component that wheel axles attach to. This is an identical replacement for a missing or a damaged axle assembly front that was installed on a new unit. A wrench set will be needed to perform this repair. Make sure to refer to the owner\\\'s manual and the appropriate...

This genuine adjuster assembly is an original part from Husqvarna, designed for use with a variety of compatible lawn mower models. Made of durable metal, this component is installed on the right side of the mower deck and is responsible for adjusting the deck height. It allows users to raise or lower the mower deck to achieve the desired cutting height for their lawn. A wrench is recommended for ...

This is a genuine replacement part manufactured for use with riding lawnmowers. This is the outer tire for the front wheels. The tire tread wears from normal use, it is recommended to replace worn tires. This tire is sold individually, the inner tube and other associative parts are available separately.

This item has been sourced from the original manufacturer to be used with riding lawnmowers from Husqvarna. The metal rim is the center of the wheel assembly and is used to support the tube and tire. This item is used for the front wheels and is sold individually.

This rear drive wheel assembly provides traction and power transfer to help move your walk-behind mower smoothly during operation. Designed as a gear-driven high wheel, it ensures reliable self-propel performance and stable movement across various lawn conditions. Featuring an 11-inch diameter, 2-inch width, and 1/2-inch bore, it is built from durable materials with a treaded surface for improved ...

This is an authentic OEM sourced replacement part that is intended to be used with riding lawnmowers from Husqvarna, Poulan, and Jonsered. The nose roller rod is used to connect the front roller to the bracket at the front of the deck. This item is available as an individual replacement part.

This is an original part from Ryobi. The gauge wheel (half, spoked) is compatible with many riding lawn mowers. The durable plastic wheel is fasted onto the shoulder bolt and the gauge bracket kit. The gauge wheel (half, spoked) is sold individually. This component is designed to prevent the deck from hitting the ground when mowing an uneven surface. A wrench and a pair of pliers are needed for the installation.

This steering shaft adapter kit is a genuine OEM replacement kit used in lawn tractors. It includes one splined adapter and one tapered adapter, used to connect the steering wheel to the steering shaft. The steering shaft adapter should be replaced if it is corroded, damaged or the threads are stripped as this can result in instability and loss of steering control. Remove the steering wheel insert...