Craftsman Lawn Mower Engines

This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.

This authentic component is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty cylinder head that was installed on a new unit. Please make sure to check appropriate diagrams for the correct location and use of this hardware. Keep in mind this hi...

This gear-governor is a special component that helps to engage the drive shaft. It is a genuine Briggs and Stratton item that is supplied by the original manufacturer for use with small engines that are commonly installed on a variety of lawn and garden equipment. It provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams for your ...

This is a genuine Briggs and Stratton, Toro part for use with lawn and garden equipment engines. The crankcase breather valve opens to relieve pressure in the crankcase. The most common reason for replacing the breather is when the small engine runs poorly. This part is sold individually. Here is a list of tools that are needed to replace the breather valve a flat-head screwdriver, hammer, 7/16th-...

This is a genuine OEM supplied replacement part that is specially designed for Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. It is the part that the piston is attached to. The piston is a central component of a two-cycle engine. It provides both the compression within the engine and it transfers the energy from combustion to the crankshaft which creates...

This is a manufacturer approved replacement part used on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent push rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. This part is made out of metal and it is sold individually.

Rod-.375dia 10.00 lg

It is a genuine item that is supplied by the original manufacturer for use with walk-behind lawn mowers. The wire rod is utilized to secure the rear trail shield. It is an identical replacement for a missing or a damaged part that was included with a new unit. Refer to the owner\\\'s manual for your model to ensure the correct application. Note, this high-quality wire rod is made of durable metal ...

This is a genuine Echo replacement part that has been sourced from the original manufacturer to be used with chainsaws. The starter assembly is a complete part that includes the cover, rope, handle, pulley, and spring. This item is used to engage the flywheel to start the motor. This starter is pre-assembled and priced as a single item.

This piston ring set is used to seal the combustion chamber inside a small engine, helping maintain proper compression and control oil consumption. Replacing worn or damaged rings can improve starting, restore power, and reduce excessive smoke. It is commonly used during engine repairs or rebuilds when performance has dropped due to compression loss.

Rod-.283dia 11.65lg d

This authentic manufacturer-sourced part is specially made for use with lawn and garden equipment. The timing gear is an important component of an engine that helps to drive the unit, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. This gear helps to rotate the camshaft, please make sure to refer to the appropriate diagrams of your model for the correct ...

This engine ring set is a genuine OEM replacement designed for small engine applications. It helps seal the cylinder properly to maintain compression, reduce oil consumption, and restore smooth, efficient engine operation. Ideal for engine rebuilds or repairs, this ring set should be replaced when wear causes power loss, excessive oil use, or reduced overall performance.

This brake linkage rod is a heavy-duty metal component designed to connect the operator’s brake pedal to the transmission braking system in riding lawn mowers and lawn tractors. Built from strong, rigid material to handle repeated force and tension, it transfers pedal movement into precise braking action for consistent stopping control. By maintaining proper linkage alignment and responsiveness, i...

This non-adjustable tie rod is designed for riding lawn mowers and lawn tractors to connect steering components and maintain proper front-wheel alignment. Made from durable steel, it supports smooth, predictable steering and stable handling during operation. It’s a practical replacement for correcting loose steering or pulling issues caused by a bent or worn tie rod.

This is an authentic Kawasaki part which is specially manufactured for use with small engines commonly installed on a variety of lawn and garden equipment. The exhaust valve is used to expel exhaust gases from the engine after fuel is fired in the cylinder. It is an identical replacement for a damaged or a missing component that was installed on a new unit. This exhaust valve is sold as an individ...

This is sold as a set that contains three rings. The rings attach to the piston and help to create a seal. When replacing these parts a screwdriver, a set of pliers, and a socket set might all be required during the installation process. These parts are made out of metal and will need to be replaced if they break or bend. They are authentic Briggs & Stratton and Toro replacement parts that are sou...