Hedge Trimmer Pumps

This is a genuine OEM replacement part, it is sold individually. By pressing the bulb, fuel will come up from the fuel tank through the fuel line then into the carburetor. Then the excess fuel will be forced back into the fuel tank through the fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on How to Replace a Prim...

This is an authentic replacement part manufactured for use with Husqvarna outdoor power equipment. The pump connects to the carburetor and is used to circulate fuel through the carburetor when cold starting the motor. This pump is available as an individual replacement part, please see model diagram for associative parts.

This is a high quality Kawasaki replacement part, it is not an aftermarket alternative. It is sourced from original equipment manufacturer for use on gas powered lawn and garden equipment. By pressing on the pump-priming bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the f...

This is a genuine OEM supplied replacement primer bulb which is specially produced for use with Husqvarna lawn and garden equipment. By pressing on the purge bulb, it will force fuel from the tank into the carburetor, once the carburetor is full of fuel, the excess fuel will be purged back into the tank through the return line. Over time primer bulbs tend to lose elasticity or crack eventually req...

This is an original Shindaiwa replacement part. The pump is commonly found in trimmers and blowers. This is a complete assembly, primarily made of metal, which is used to pump fuel through the carburetor assembly. You may require a screwdriver when replacing this item. This part is sold individually.

This authentic manufacturer-sourced component which is specially designed for use with Echo handheld lawn and garden equipment. It provides an identical replacement for a missing or a faulty pump body assembly that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind t...

This pump plate is supplied directly from the original equipment manufacturer. The metal component is designed for use with several lawn and garden devices. This protective item is secured between other plates in the carburetor. Please be sure to refer to specific tool manual and diagrams for repair instructions. The pump plate is sold individually. A screwdriver is helpful in making the replacement.