Echo Hedge Trimmer Springs and Shock Absorbers

This genuine OEM sourced replacement part is designed for use with blowers/trimmers. This is the spring for the spark plug boot. This spring is made out of metal and it is sold individually.

This item has been sourced from the original manufacturer and is intended to be used with trimmers, edgers, and blowers from Echo. The metal spring is part of the recoil starter assembly and is used to rewind the starter rope after it has been pulled to start the motor. This item is sold as an individual replacement part.

This spring is sourced directly from the original equipment manufacturer for use with Echo handheld trimmers and edgers. It is an important component that applies tension on the trigger-throttle. Over time it may wear out and lose tension eventually requiring a replacement. To ensure the correct installation of this hardware, check the diagrams of your specific model. This high-quality spring is m...

This is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with trimmers and power source attachments. The metal spring is used to apply torsion to the trigger to keep it in position and allow the trigger to compress when adjusting the motor's output. This item is available as an individual replacement part.

This part is an authentic manufacturer-sourced replacement part which is specially designed for trimmers, brushcutters and blowers. This part is sold individually and made of metal. The return spring helps return the starter pawl back to the regular position after you are done starting the engine with the recoil starter.

This is an authentic replacement part from original manufacturer. It is guaranteed compatible with the Echo tools listed below. This is a trigger return spring which attaches to the control handle and throttle trigger. During repair, be sure to note its positioning in relation to these other parts; correct orientation is essential for tool functioning. Springs are easily lost or broken so keeping ...

This is a genuine Echo replacement part that has been sourced from the original manufacturer to be used with edgers and Trimmers. The metal spring Lever Return is used to provide tension on the Lever of the trimmer to work out properly. This part is available as an individual replacement part. You will need a screwdriver to replace this part.

Genuine Manufacturer Sourced replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. Replacing damper spring could solve your problems or Starter rope being difficult to pull or Recoil starter not working at all.

This is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with trimmers and edgers. The metal spring is used to provide torsion to the throttle lockout lever to keep the lever extended until it is pressed. This item is available as an individual replacement part.

This is an original part from Echo. The metal rewind spring is made for use with a variety of lawn and garden engines. This item is fitted between the recoil drum and the starter plate in the starter assembly. This component rewinds the starter rope after has been pulled to start the motor. A screwdriver is required for the repair. The rewind spring is sold individually.

This is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with hedge clippers. The metal spring is used to provide torsion on the throttle trigger assembly to allow the trigger to return after being pulled. This item is available as an individual replacement part.

This is a genuine replacement part manufactured for use with lawn and garden equipment. The starter pawl return spring returns the starter pawl to its normal position after pulling the starter rope. If the pawl spring wears out the pawl will remain engaged witht the starter pulley. The starter pawl return spring is sold individually.

This is an authentic Echo replacement part manufactured for use with outdoor power equipment. The clutch along with the clutch drum allow a machine to idle without moving the drive shaft. When the throttle is engaged the clutch expands into the clutch drum which turns the drive shaft. If the clutch spring fails the clutch will not engage the drum and drive shaft, so the engine will run, but the ma...

It is an authentic item that is supplied by the original equipment manufacturer for Shindaiwa and Echo handheld lawn and garden equipment. This is an identical replacement for a missing or faulty recoil spring that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quali...

This is a genuine item that is supplied by the original equipment manufacturer for use with Echo and Shindaiwa handheld lawn and garden equipment. It is a high-quality replacement for a missing or damaged spring that is part of recoil starter mechanism, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this h...

This is an original part from Echo. The metal spring is made for use with many hedge clippers. Fastened to a screw, this item provides the necessary tension for the spring holder in the frame. The spring is sold individually. A hex key and pliers are needed for making the replacement.

This is an original replacement part sourced directly from the manufacturer. The idle spring is commonly found in yard tools from Echo and Shindaiwa, such as chainsaws, blowers, and trimmers. This part is made of metal, and is used to provide tension to the idle screw, which is used to adjust the flow of fuel through the carburetor while the engine is idling. You may require a screwdriver when ...