Engine Valves

This is the discharge valve assembly for a variety of pumps. This OEM valve assembly does not come with the pump head, but features a retaining clip, spring, valve disc and valve bumper, all of which measure approximately 1-inch in diameter. Over time, valves can collect debris or corrode, and with normal wear and tear, they can get damaged, leak, or restrict the flow of fluid through the pump. If...

The valve fuel check fits between the hose clamp and the grommet check valve. This is an authentic part from Husqvarna, Poulan, and Jonsered for use in zero turn lawn mowers. It is sold individually and is made out of plastic. A set of pliers and a socket set might be helpful during the installation of this part. This part may break and will need to be replaced.

This suction valve, also known as a discharge valve, is sourced from the original equipment manufacturer for use in air compressors. It is responsible for ensuring that air is drawn into the cylinder when the piston moves downward. When the piston moves back up during the compression stroke, the suction valve closes to prevent the compressed air from flowing back into the suction line. It includes...

This is a geniune OEM part. The Briggs & Stratton, 10-16 amp voltage regulator is composed of metal, wiring and plastic parts. The regulator is compatible with many lawn and garden machines. This part is connected to the engine's terminals, and has been designed to manage the voltage in the device's electrical system. A screwdriver and a socket set are needed in making the removal and repair. It i...

This is an authentic OEM sourced part that is intended to be used with small engines from Briggs & Stratton and Toro. The shut-off valve attaches to the bottom of the fuel tank and is used to link the fuel line and to control the flow of fuel that goes to the engine. This item is available as an individual replacement part.

This part is an OEM from Kohler. The exhaust valve (std.) is composed of high-quality metal, and is compatible with many small engines. This part is fitted into the cylinder head assembly. The charged fuel moves through the exhaust valve to the manifold. This item is sold individually. A wrench is often needed in making the repair.

This is a genuine OEM part that is intended to be used with lawnmower engines from Briggs & Stratton, Toro, and Murray. The valve attaches to the incoming fuel line and is used to regulate the flow of fuel that enters the engine. This item is available as an individual replacement part.

The float valve is used to allow fuel into the float chamber when the chamber has been drained and to stop fuel from entering the chamber when it is full. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. This authentic part is supplied by the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden...

This item is a genuine Walboro replacement part that is OEM sourced to ensure high quality. The check valve is intended to be used with carburetors for small engines. This item fits into the center of the air purge body. This item is used to allow the purge bulb to force air through the check valve causing fuel be drawn from the tank to the fuel pump and through the carburetor. This part is priced as a single item.