Shindaiwa Edger Hardware

This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.

This is a genuine OEM replacement part, it is sold individually. This clip is used in various areas of the over 150 outdoor product models shown below. It is most commonly used to clamp hoses or tubes in place.

This manufacturer sourced replacement part designed for use with a variety of handheld lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is a standard hardware which will have multiple applications based on your equipment. This lock nut is made out of metal and it is sold individually.

It is an authentic OEM sourced item that is specially produced for use with Shindaiwa and Echo handheld lawn and garden equipment. This screw is generally used to secure the housing, please make sure to check appropriate diagrams for correct location and use of this hardware. One torx screw is included per order.

This is a Genuine OEM Sourced replacement part designed for use with Lawn and Garden Handheld equipment. The purpose of this clip is to secure the fuel filter to the fuel pick up tube on the unit. This item is made out of Metal and it is Sold Individually.

This is an original manufacturer approved replacement item commonly used on trimmers, brushcutters and edgers. The purpose of this nut is to secure cutter head assembly to the spindle/shaft of a trimmer. It is a metal nut which is sold individually. Please only use properly sized wrench when securing or removing this nut.

This washer is available as an individual replacement part. It is used in various lawn and garden tools made by Echo and Shindaiwa. The washer attaches to the cylinder cover with a screw. It is made out of metal and is very small, so it will need to be replaced if it becomes lost or broken. An allen wrench will be needed when replacing this washer which is an authentic OEM part.

It is a genuine OEM sourced replacement part that is specially made for use with Echo handheld lawn and garden equipment. This screw has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct location and use of this hardware. It is made from high-quality metal and it is sold individually.

This replacement screw is a high quality hardware which has multiple applications based on your equipment, please refer to appropriate diagrams for proper location and use of this item. It is a high quality torx screw that is made from durable metal and it is sold individually.

This is a genuine OEM part. The metal, split pin 2 X 22 is designed for a variety of lawn and garden tools. With a nut, it is most often used to secure the blade fixture of trimmer devices. It is recommended to refer to specific manual and diagrams for repair instructions. A hex key may be needed in making the repair. This item is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with trimmer/brushcutters made by Echo. The user will need to replace this screw if it is missing or not working correctly. This screw is made of metal and sold individually.

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This is an authentic replacement part manufactured for use with outdoor power equipment. The screw has multiple applications depending on the model of equipment. This screw is sold as an individual replacement part please see model diagram for associative parts.

This genuine OEM replacement part is specially produced for Shindaiwa and Echo handheld lawn and garden equipment. It is generally used to secure the muffler, for correct application of this hardware please make sure to check appropriate diagrams of your unit. This hex socket head bolt is made from durable metal and it is sold individually. When installing or removing this bolt you will need a hex...

This is an original replacement part manufactured for use with outdoor power equipment. The special screw is used with several types of equipment and the screw may have multiple applications. This fuel pump cover screw is used to secure the primer cover to the air purge body and fuel pump body. The fuel pump screw is available as an individual replacement part, please see model diagram for part location and usage.

This is a genuine OEM replacement part designed to secure the blade on brush cutters/trimmers and edgers. Please note this is a hex head bolt which requires a wrench to secure it. This bolt is sold individually.

This is a genuine replacement part manufactured for use with outdoor power equipment. The special spring clip is commonly used to secure fuel lines. The spring clip is used with several types of equipment and can have multiple applications. This spring clip is available as an individual replacement part, please see model diagram for part location and usage.

This is an original part from the Echo manufacturer. The blade fixture is made for use with many edger and trimmer devices. This component often secures the blade fixing plate of the trimming tool. The blade fixture is sold individually. A wrench and a screwdriver may be required for the removal and replacement.