Shindaiwa Edger Carburetors

This is a genuine Echo replacement part. It is sold individually. By pressing the bulb it will purge the air from the carburetor. Then fuel will come up from the fuel tank through the fuel line then into the carburetor. The excess fuel will be forced back into the tank through the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced.

This is a genuine replacement part manufactured for use with outdoor power equipment. This is the gasket between the diaphragm gasket and the carburetor body. It is recommended to replace gaskets when servicing the carburetor to ensure a good seal when the carb is reassembled. This gasket is sold individually.

This is an authentic component which is supplied by the original equipment manufacturer for use with Shindaiwa lawn and garden equipment. The carburetor connects to the cylinder and is used to supply the engine with a combustible mixture of fuel and air. Unfortunately, over time components will wear out and they may begin to fail eventually requiring replacements. Check the appropriate diagrams fo...

This genuine replacement component is supplied directly from the original equipment manufacturer for use Shindaiwa lawn edgers and trimmers. The purpose of this part is to mix the air and the gas before the highly combustible fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem....

This is an authentic part that is supplied directly from the original equipment manufacturer for Shindaiwa trimmers and brush cutters. The carburetor mixes air and gas before the fuel mix goes to the engine. This part is made of metal and is sold individually. Let the engine cool and drain the gas tank before starting this repair. You may need a screwdriver and a pair of needle nose pliers to aid you in this repair.