Shindaiwa Chainsaw Transmissions and Clutches

Genuine OEM replacement part, this part is sold individually. The Bevel Gear is part of the chain tensioning assembly of the chainsaws listed below. This part aid in loosening and tightening the chain on the chain bar.

This is a genuine manufacturer approved replacement part designed for use with chainsaws. This part is an essential part of chain tensioner mechanism. When replacing this part you will need a screwdriver. It is made out of metal and it is sold individually.

This item is a genuine Echo replacement part that has been sourced from the original manufacturer to be used chainsaws. The clutch drum is used to house the clutch and includes the sprocket. As the motor's RPM increases it causes the clutch to expand and rotate the clutch drum and sprocket causing the chain to rotate around the bar. This item is available as an individual replacement part.

This is a genuine OEM part. The clutch drum is made for use with many chain saws. The metal component secures the clutch assembly, driving the chain. The clutch drum is sold individually. A screwdriver and a socket set are helpful for the removal and replacement.

The clutch drum goes between the needle bearing and the washer. This authentic item is supplied directly from the original equipment manufacturer for use with Echo chainsaws. Keep in mind that this high-quality part is made of metal and sold individually. If this part becomes broken it will need to be replaced and may require a set of pliers, a socket set, and a screwdriver during the installation.

This is a genuine Echo replacement part that has been sourced from the original manufacturer to be used with chainsaws. The clutch kit includes the drum, sprocket, e-ring, washer, and needle bearing. The kit is used to house the clutch to allow the saw to idle and to drive the chain when the RPM is increased. This item is priced as a complete part kit.

This is an OEM sourced replacement part used on Echo chainsaws. The clutch drum works in unison with the clutch. Together, they make it possible for the engine to idle without rotating the trimmer head. When the throttle is applied, the clutch assembly expands into the clutch drum, which activates the trimmer head.A common issue with the clutch drum is an erosion of the spindle where the upper dri...

This is an authentic OEM sourced part which is specially made for Echo chainsaws. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will d...

This is an authentic replacement part sourced from the original manufacturer for Echo chainsaws. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment per...

This brake band is an OEM direct from Shindaiwa. Compatible with many chainsaws, the metal band is fastened into the brake assembly. This protective item fits over the clutch drum, helping to lock up the motor when needed. The brake band is sold individually. However, it is also included in the brake chain assembly (P021050750). A screwdriver and pliers are often helpful with the repair.

This is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with chainsaws. The brake lever connects to the chassis in front of the handle and is used to tighten the brake band to stop the clutch drum and the chain. This item is available as an individual replacement part.

Clutch Shoe assembly

This authentic manufacturer-supplied washer is specially designed for use with Echo chainsaws. It is a special hardware that helps to provide a tight seal between connected components of the clutch mechanism. This is an identical replacement for a missing or a damaged part that was installed on a new unit. One durable metal part is included. Refer to the appropriate diagrams for your model to ensu...

This is an original part from Echo. The brake connector is made for use with several Echo chainsaw models. Composed of metal and plastic, this component helps to secure the brake band onto the brake cover. The connector brake is sold individually. A torx screwdriver is necessary when replacing this part.