Poulan Chainsaw Carburetors

This carburetor primer bulb helps draw fuel into the carburetor and remove air from the fuel lines, making engine starting easier and more reliable. Made from flexible rubber, it is designed to handle regular use but can wear out over time. Replacing a cracked or damaged bulb can improve fuel flow and restore proper starting performance.

This is a genuine OEM replacement part, it is sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on

This is an Original Manufacturer Approved Carburetor Kit which includes a Metal Body Walbro WT89 Carburetor, Plastic Grommet and a Plastic Air Filter Housing. It is used on a variety of Poulan Gas Powered Chainsaws. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing th...

This is an authentic replacement carburetor which is supplied by the original equipment manufacturer for use with Craftsman chainsaws. The purpose of this part is to mix the air and the gas before the combustible mix goes into the engine, if the engine won\\\'t start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. Please note ...

This is a genuine manufacturer-sourced replacement gasket repair kit that is specially made for use with Paramount and Poulan lawn and garden equipment. It is utilized to replace carburetor gaskets and diaphragms that were originally installed on a new unit. If you have a problem with your carburetor this will usually take care of it. Keep in mind this high-quality kit is sold individually. Please...

This is a Genuine OEM rebuild kit designed for Walbro Carburetors. This kit contains all the necessary Gaskets and Diaphragms needed to rebuild your carburetor. If your engine runs sluggish or it dies shortly after starting it, you may need to rebuild your carburetor. Replacing these items you would need a Screwdriver and Pliers.

This is an authentic OEM part. The metering diaphragm is a Walbro part that is used inside of carburetors that work with small engines. This part goes between the carburetor body and the fuel pump. This diaphragm is used to help regulate the fuel to maintain the proper air/fuel ratio. This part is priced as a single item.

This is an authentic item that is specially designed for use with Walbro carburetors commonly installed on lawn and garden equipment. Gaskets are generally utilized to provide a tight seal between connected parts, over time the material may wear out and even begin to crack eventually requiring a replacement. This high-quality kit is sold individually, keep in mind it includes all the necessary com...

This is an authentic Poulan replacement part sourced from the original manufacturer for use with chainsaws. This carburetor adapter kit sits between the carburetor, and the small block. The kit includes: the adapter, intake tube, carb gasket, adapter gasket, and the adapter screws. The carburetor kit is sold as a complete individual kit.

This replacement carburetor is sourced from original equipment manufacturer and it is designed for use with Poulan chainsaws. Carburetor mixes air and gas before the fuel mix goes to the engine. This is a metal body carburetor with a rubber primer bulb and fuel hose. Please note gaskets are sold separately. Requires a screwdriver to complete this repair. • Remove the rear cover • Remove the ...

This is an authentic OEM sourced part that is intended to be used with chainsaws from Poulan, Husqvarna, and Jonsered. Overtime ethanol in gasoline can deposit residue in the carburetor, and it can eventually become clogged and will cause engine performance issues. The kit includes the recommended parts to be replaced when cleaning and re-building a damaged carburetor.

This metering diaphragm is an original part for use in edgers, blowers, trimmers, and chainsaws made by Poulan, Paramount, Weed Eater, Husqvarna, and Jonsered. It fits between the metering diaphragm gasket and the metering diaphragm cover. It is made of a thin material and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part and keep in mind that it is sold individually.

This is an authentic OEM sourced component which is specially made for use with gas-powered lawn and garden equipment. The part provides an identical replacement for a missing or a worn diaphragm that was installed on a new unit. It is provides a tight seal for the fuel pump. Please make sure to refer to the appropriate diagrams of your model for the correct repair procedure. Keep in mind this hig...

This item is an authentic Ridgid kit-carb that has been sourced from the original manufacturer to be used with chainsaws. Over time due to regular use parts tend to wear out and they may begin to fail eventually requiring replacements to ensure your tool functions properly. This kit includes all the recommended component to be replaced when repairing your carburetor. To ensure the proper procedure...

This part is an OEM from Husqvarna and Poulan for use in chain saws. The fuel pump diaphragm attaches to the pump side gasket. If this item breaks it will need to be replaced and may require a screwdriver during the installation. It is made of a thin material and is available as an individual replacement.

It is a genuine item that is supplied by the original equipment manufacturer for use with Husqvarna chainsaws. This is an identical replacement for a missing or a faulty inlet needle that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made o...

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Poulan and Husqvarna chainsaws. This is a complete gasket diaphragm kit which is utilized to provide an air-tight seal for the carburetor, over time the material may wear out and begin to crack eventually requiring a replacement. The components are made of high-quality composite material and the...