Jonsered Chainsaw Hoses and Tubes

This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.

This 25-inch fuel line carries fuel from the tank to the carburetor, ensuring proper engine operation. Made from durable clear plastic, it is designed to withstand regular use but may become clogged or brittle over time. Replacing a worn or damaged line can help prevent leaks and restore reliable starting and performance.

This is a genuine manufacturer-sourced item that is specially designed for use with Craftsman lawn and garden equipment. The purpose of this fitting is to connect two pieces of fuel line together, unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality hardware is made of durable plastic and is sold individually. Plea...

This is an Authentic OEM sourced replacement part designed for use with Husqvarna Chainsaws. This is the Hose that delivers fuel from the Tank to the Engine. It is made out of Rubber and it is Sold Individually. Please note Fuel Filter is Sold Separately.

This is a genuine manufacturer sourced replacement part designed for use with Husqvarna chainsaws, brushcutters and hedge trimmers. This is the hose that delivers fuel from the tank to the engine. It is made out of rubber and it is sold individually. Please note fuel filter is sold separately.

The oil hose connects to the pump cylinder. This part is an OEM from Husqvarna and Jonsered for chainsaws. Keep in mind that this part is sold individually. If this part breaks it can prevent oil from entering where it needs to go, so it will need to be replaced. A screwdriver and a socket set might be required during the replacement of this part.

This fuel line is a genuine OEM part, not an aftermarket equivalent. It is used on Husqvarna chainsaws to supply the fuel. This hose is connected to the carburetors primer bulb and the fuel filter. Over time fuel lines tend to deteriorate and crack allowing for leaks. A damaged or brittle line should be replaced immediately. Please note, it is sold individually, (1) hose per order.

This oil hose is an OEM direct from Husqvarna. The durable plastic part is made for use with many chainsaws. The hose secures the oil pump assembly to the oil screen, sending oil to lubricate the chain components. The oil hose is sold individually. A screwdriver and a socket set are helpful in the repair. Please refer to the specific manual for further instructions.

This 38 mm fuel hose is a genuine OEM sourced item, it is not an aftermarket imitation. It is high quality item specially designed for Husqvarna chainsaws, brushcutters and string trimmers. This hose is connected to the carburetor. Over time fuel lines tend to deteriorate and crack allowing for leaks. A damaged or brittle line should be replaced immediately. Please note, one flexible plastic fuel ...

This item is a genuine OEM sourced replacement part that is intended to be used with chainsaws from Poulan and Jonsered. The intake tube fits between the carburetor and the adapter. This item is used as a flexible pathway for air to travel from the carburetor to the adapter. This item is sold as an individual replacement part.

This fuel hose is a genuine OEM replacement part supplied directly from the manufacturer. It is commonly used in Husqvarna chainsaws. This fuel hose transfers fuel inside the machine. It is made of rubber, and it should be replaced if it it is kinked or beginning to tear. This part is sold individually.

This item is a genuine Husqvarna replacement part that is also used with Jonsered. The plastic fuel line is intended to be used with chainsaws. This item is used to pick up and carry fuel from the tank to the carburetor assembly. This item is available as an individual replacement part.

This oil hose is supplied directly from the original equipment manufacturer. The Husqvarna component is made for use with many chainsaws. This plastic hose is fastened to the cylinder in the oil pump assembly, providing oil for the chainsaw motor. A screwdriver and a socket set are necessary for making the replacement. It is recommended to refer to engine manual and diagrams for further instructio...

This is an original Husqvarna replacement part manufactured for use with chainsaws. This special hose returns fuel from the primer back to the tank while purging the carburetor. The return hose is sold individually, please see model diagram for any additional parts or fuel lines.

This hose is supplied directly from the original equipment manufacturer. The flexible rubber hose is used on many Husqvarna chainsaws. This item is fitted onto the oil pump assembly, and is sold individually. Please refer to the manual for the proper application and installation of the hose. A hex key and pliers may be required for making the replacement.

The oil pickup assembly transfers oil between the tank and the oil pump. This is a genuine Poulan and Jonsered replacement part for use in chainsaws. It is made out of rubber with a metal spring. If this part becomes broken it will need to be replaced. A screwdriver and a set of pliers may be needed while replacing this part which is sold individually.

This is a genuine item that is supplied by the original equipment manufacturer for use with Poulan and Jonsered chainsaws. It is an identical replacement for a damaged or a faulty oil pick up assembly that was installed on a new unit. The part carries oil from the tank to the oil pump. To ensure the exact location and the correct application of this component, refer to the appropriate diagrams for...

This is an authentic part which is supplied directly from the original equipment manufacturer for use with Husqvarna chainsaws. It is one of the hose for the oiler assembly. Unfortunately, over time it may wear out and begin to crack eventually requiring a replacement. Make sure to refer to the owners manual and the appropriate diagrams of your model for the exact location and the correct installa...

This is an original Husqvarna replacement part manufactured for use with chainsaws. The suction hose is used to pick up oil from the oil tank to be used to lubricate the chain and sprocket. This suction hose is available as an individual replacement part.

This is a genuine OEM sourced component which is specially designed for use with Poulan and Husqvarna chainsaws. It is an identical replacement for a missing or a faulty elbow through which the oil will travel. This part helps to connect the oil lines, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-q...