Jonsered Chainsaw Hardware

Genuine OEM Husqvarna replacement part, this item is sold individually. This screw is used to secure the Starter Housing on the Husqvarna Chainsaws. Use a Flat head Screwdriver or a Hex Key to tighten or loosen the screw.

This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 thread and 1.25?mm pitch, replacing a worn or missing nut helps m...

This is an authentic OEM sourced replacement screw designed for use with a variety of Husqvarna power equipment. It is a standard hardware which has multiple applications based on your tool. This part is made out of Metal and it is Sold Individually. Requires a Hex Key or a Wrench to tighten/loosen this Screw.

This is a genuine OEM approved replacement screw made for Husqvarna chainsaws and brush cutters. It is a standard hardware which has multiple uses based on your equipment. Please refer to diagrams for correct application. It is made out of metal and it is sold individually. You would need a torx screwdriver to install or remove this screw.

It is an authentic item that is supplied by the original manufacturer for Husqvarna chainsaws. This is the special pin that secures the throttle catch to the housing. It is an identical replacement for a damaged or a missing hardware that was installed on a new equipment. One durable metal pin is included. You may need a screwdriver to remove the old pin and secure the new one. Check the diagrams ...

This replacement screw is an authentic Husqvarna part. It is a genuine manufacturer approved part commonly used on a variety of power equipment including chainsaws, trimmers and sweepers. This standard hardware is utilized in many different placed depending on a tool. Please make sure to check appropriate diagrams to verify correct location and application for this screw. It has hex head that will...

This is an important part of the chain tensioner which in conjunctions with tension screw (sold separately) allow user to tighten or loosen the chain. It is a genuine OEM sourced replacement part designed for use with Husqvarna chainsaws. This part is made out of plastic material and it is sold individually. If the chainsaw bar doesn't adjust when you turn the tension nut or the screw are usually worn or damaged.

This screw is a genuine Husqvarna replacement item. It is supplied directly from original equipment manufacturer for use on chainsaws. It is a special screw that is used in various locations on the saws. To ensure if this is the correct screw that you are looking for, make sure to check appropriate diagrams for your model. This is a screw can be adjusted by a Phillips or a flat-head screwdriver. P...

This is a genuine manufacturer approved replacement part designed for use with chainsaws. It is used to secure starter housing to the unit. This is a metal phillips head screw which is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman chainsaws. This is the special nut that helps to secure the bar. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the exact location and application of this part. Keep in min...

This authentic component is an OEM part which is designed for use with Poulan chainsaws. It is an important component of the bar adjustment mechanism which helps to secure the screw. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. Keep in mind this high-quality retainer is made of durable metal and is sold as an individual component. Check the ...

This replacement hardware is an authentic OEM sourced item, it is not an aftermarket imitation. It is commonly utilized on Husqvarna and Poulan chainsaws. This screw has multiple applications depending on the equipment. Please make sure to check appropriate diagrams for correct location and use of this hardware. One hex socket head screw is included per order.

This replacement screw is specially designed for use with Husqvarna chainsaws. It is supplied directly from original equipment manufacturer. This kit allows you to tighten or loosen the the chain tension. Usually if the bar doesn't adjust when you turn the tension screw, either the bolt or tensioner nut is worn or damaged. Includes one (1) metal screw. Please note you will need a flat head screwdr...

This is a genuine OEM sourced replacement hardware, not an aftermarket imitation. It is specially made for Husqvarna chainsaws. This screw is generally used to secure the starter housing. Please note, this torx screw is sold individually. To install or remove this hardware you can use either a flat-head screwdriver or a torx screwdriver.

Genuine Poulan replacement part, this item is sold individually. This Screw is used on the Chainsaws listed below. It is used to attach the Cylinder Shield to the main body of the Chainsaw. This is a size T-25 Torx Screw.

It is an authentic manufacturer-sourced part which is specially made for Poulan and Husqvarna chainsaws. The part is utilized on a chainsaw to to adjust the blade to the correct tension. A correctly adjusted chainsaw blade will last longer and cut better. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Keep in mind this high-quality pin-ba...

This is an authentic replacement part manufactured for use with chain saws from Craftsman. This part helps adjust the tension on the bar, which loosens or tightens the chain. You may need a screw driver to replace this part. This adjustable bar pin is made of metal and sold individually.

This is a Genuine Manufacturer Approved replacement part designed for Husqvarna Chainsaws. This item is made out of Metal and it is Sold Individually. This Screw is used to secure the Muffler. Requires a Hex Key/Allen Wrench to tighten or loosen this Bolt.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Husqvarna lawn and garden equipment. It is an identical replacement for a missing or damaged hexagon nut that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and applic...

This E-ring is an authentic OEM part which is designed for use with Husqvarna chainsaws. It helps to secure the pivot pin which holds the handguard. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. Keep in mind this high-quality E-ring is made of durable metal and is sold individually. Check the appropriate diagrams for your model for the exact ...