Jonsered Chainsaw Carburetors

This is a genuine Poulan replacement part, and sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on

This is a genuine OEM replacement part, it is sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on

This is an Original Manufacturer Approved Carburetor Kit which includes a Metal Body Walbro WT89 Carburetor, Plastic Grommet and a Plastic Air Filter Housing. It is used on a variety of Poulan Gas Powered Chainsaws. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing th...

This is an authentic replacement carburetor which is supplied by the original equipment manufacturer for use with Craftsman chainsaws. The purpose of this part is to mix the air and the gas before the combustible mix goes into the engine, if the engine won\\\'t start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. Please note ...

This is a genuine manufacturer-sourced replacement gasket repair kit that is specially made for use with Paramount and Poulan lawn and garden equipment. It is utilized to replace carburetor gaskets and diaphragms that were originally installed on a new unit. If you have a problem with your carburetor this will usually take care of it. Keep in mind this high-quality kit is sold individually. Please...

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Husqvarna chainsaws. The purpose of a carburetor is to mix the air and the gas before the combustible mix goes to the engine, over time components may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality metal body carburetor is sold individually.

This is an authentic OEM sourced replacement component which is specially designed for Craftsman chainsaws. It fits between the carburetor and engine cylinder, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Over time it may wear out, get damaged or simply get lost eventually requiring a replacement. Keep in mind this adapt...

This is an authentic Poulan replacement part sourced from the original manufacturer for use with chainsaws. This carburetor adapter kit sits between the carburetor, and the small block. The kit includes: the adapter, intake tube, carb gasket, adapter gasket, and the adapter screws. The carburetor kit is sold as a complete individual kit.

This is an authentic OEM sourced part that is intended to be used with chainsaws from Poulan, Husqvarna, and Jonsered. Overtime ethanol in gasoline can deposit residue in the carburetor, and it can eventually become clogged and will cause engine performance issues. The kit includes the recommended parts to be replaced when cleaning and re-building a damaged carburetor.

This metering diaphragm is an original part for use in edgers, blowers, trimmers, and chainsaws made by Poulan, Paramount, Weed Eater, Husqvarna, and Jonsered. It fits between the metering diaphragm gasket and the metering diaphragm cover. It is made of a thin material and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part and keep in mind that it is sold individually.