Husqvarna Chainsaw Caps and Lids

This is a genuine manufacturer-sourced component which is specially made for use with Craftsman lawn mowers and garden tractors. The purpose of this part is to the hub and the axle from dirt and other debris. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable plastic and ...

It is an authentic replacement cap-spindle that is supplied by the original equipment manufacturer for use with Poulan, Ryobi and Husqvarna riding lawn mowers and garden tractors. It is an identical replacement for a missing or damaged cap that was originally installed on a new equipment. The cap is utilized to cover the spindle. Make sure to check the appropriate diagrams of your model for the ex...

This is an authentic replacement part sourced directly from the manufacturer. The cap is commonly found in Craftsman lawn tractors. This part is placed on the end of the torsion spring to keep it from damaging the deflector shield. You may require a wrench and pliers when replacing this item. The cap is available as an individual replacement part.

This part is the replacement fuel cap assembly for your chainsaw. It is made of black plastic and is sold individually. The fuel cap prevents fuel from spilling out of the chainsaw and prevents debris from entering the fuel tank. If the fuel cap is stripped or missing the O-ring, it can cause a leak, and will need to be replaced. To replace the fuel cap simply screw the old one out and screw the n...

The 530014347 Fuel Cap Assembly is a genuine Poulan replacement part. It purpose is to keep the fuel in the fuel tank. It is removed from the fuel tank to refill the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground and getting dirt and debris on it and contaminating the tank.

This is an original Husqvarna replacement part manufactured for use with chainsaws. Some ignition models do not include the spark plug connector also called a spark plug boot, it is recommended to inspect the spark plug boot or replace it when servicing the ignition module. The rubber spark plug connection kit includes the coil spring. The coil spring has a sharp end that pierces the insulation of...

This is a genuine OEM approved replacement part for use with Husqvarna chainsaws. It is designed to keep the fuel/oil in the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground. It is made out of plastic and it is sold individually.

This hand guard is an original part from Husqvarna. The plastic feature is made for many chain saws. The hand guard is designed to stop a chain during a kickback. A wrench set and an Allen wrench are needed to secure the hand guard to the crankcase. This item is sold individually.

This is a genuine manufacturer approved replacement part designed for use with chainsaws. This part is an important safety feature because it prevents the chainsaw chain from flying off the bar if it breaks or comes loose from its track. It is made out of metal and it is sold individually. Please note the screw used to secure it is sold separately.

This hand guard is a replacement part sourced directly from the original equipment manufacturer. It is commonly used in chainsaws crafted by Husqvarna. This hand guard should be replaced if it is broken or damaged. A screwdriver is needed to replace this part. A wrench is recommended but not required. This hand guard is sold individually.

This is an original part from Husqvarna. The metal chain catcher is compatible with many chainsaw devices. This component is fastened onto the felling dog and the crankcase, helping to steady the saw blade for safe cutting. You may require a wrench and screwdriver when replacing this part. This item is sold individually.

This authentic item is supplied directly from the original equipment manufacturer for use with Husqvarna chainsaws. It is an identical replacement for a faulty or a damaged filter cover that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durab...

This is a genuine OEM sourced replacement oil cap. It is specifically manufactured for Poulan and Husqvarna chainsaws and pole saws. It is designed to keep the oil in the tank. It includes a retainer that remains in the tank to keep the cap from falling out and getting lost. It is made out of durable plastic and it is sold individually. This cap also includes a rubber seal that ensures no leaks would occur.

This tank cap assembly is a genuine replacement part supplied directly from Husqvarna. It is compatible with many models of chainsaws. This assembly includes the cap and the holder (part 503578901). The cap is designed to keep fuel inside the tank, as well as prevent outside contaminants from entering the tank. The holder connects the cap to the tank. This assembly should be replaced if either part is damaged.

This felt air filter is a genuine replacement part designed for use with chainsaws. Built to capture dust, dirt, and other fine particles, it ensures clean airflow to the engine, helping maintain strong performance and reducing unnecessary wear. By keeping debris out, this filter plays a crucial role in prolonging the life of your equipment while supporting efficient operation.

This chain guide is an OEM part direct from Husqvarna. The plastic guide is fitted onto the chainsaw clutch cover assembly, and is sold individually. This component assists with protecting and helping the chain to cut in a straight line. A screwdriver and a wrench set is often needed for making the replacement.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Poulan chainsaws. It is an identical replacement for a missing or faulty air filter cover that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality ite...

It is an authentic OEM replacement part that is specially designed for Husqvarna chainsaws. This is the left part of the handle that houses the trigger switch. It is made from durable high quality plastic and it is sold individually, please note the hardware to secure it is sold separately.

This flip-top tank cap assembly is designed to provide a secure, leak-resistant seal for fuel or bar oil reservoirs while allowing easy, tool-free access. Featuring a built-in lever for quick opening and closing, it simplifies refueling and maintenance without the need for additional tools. Constructed from durable materials for reliable performance, it helps maintain proper tank pressure and prev...