Chainsaw Carburetors
Popular Chainsaw Carburetors Parts
- Manufacturer Part Number:
- 530071835
This is a genuine Poulan replacement part, and sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on
- Manufacturer Part Number:
- 530047721
This is a genuine OEM replacement part, it is sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on
- Manufacturer Part Number:
- 545081885
This is an Original Manufacturer Approved Carburetor Kit which includes a Metal Body Walbro WT89 Carburetor, Plastic Grommet and a Plastic Air Filter Housing. It is used on a variety of Poulan Gas Powered Chainsaws. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing th...
- Manufacturer Part Number:
- 545070601
This is an authentic replacement carburetor which is supplied by the original equipment manufacturer for use with Craftsman chainsaws. The purpose of this part is to mix the air and the gas before the combustible mix goes into the engine, if the engine won\\\'t start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. Please note ...
- Manufacturer Part Number:
- 530069844
This is a genuine manufacturer-sourced replacement gasket repair kit that is specially made for use with Paramount and Poulan lawn and garden equipment. It is utilized to replace carburetor gaskets and diaphragms that were originally installed on a new unit. If you have a problem with your carburetor this will usually take care of it. Keep in mind this high-quality kit is sold individually. Please...
- Manufacturer Part Number:
- 531215601
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Husqvarna chainsaws. The purpose of a carburetor is to mix the air and the gas before the combustible mix goes to the engine, over time components may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality metal body carburetor is sold individually.
- Manufacturer Part Number:
- 530049700
This is an authentic OEM sourced replacement component which is specially designed for Craftsman chainsaws. It fits between the carburetor and engine cylinder, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Over time it may wear out, get damaged or simply get lost eventually requiring a replacement. Keep in mind this adapt...
- Manufacturer Part Number:
- D10-WAT
This is a Genuine OEM rebuild kit designed for Walbro Carburetors. This kit contains all the necessary Gaskets and Diaphragms needed to rebuild your carburetor. If your engine runs sluggish or it dies shortly after starting it, you may need to rebuild your carburetor. Replacing these items you would need a Screwdriver and Pliers.
- Manufacturer Part Number:
- 95-526-9-8
This is an authentic OEM part. The metering diaphragm is a Walbro part that is used inside of carburetors that work with small engines. This part goes between the carburetor body and the fuel pump. This diaphragm is used to help regulate the fuel to maintain the proper air/fuel ratio. This part is priced as a single item.
- Manufacturer Part Number:
- 1475703-S
The carb repair kit is sold as a set that contains all the necessary parts. These are genuine Kohler parts sourced directly from the manufacturer for use in engines. A wrench and a screwdriver may be necessary during the installation of these items. They are made out of plastic and rubber. They may become broken and will need to be replaced.