Husqvarna Brush Cutter Starters

This is an authentic starter pawl bridge which is sourced directly from original manufacturer. This item provides the resistance needed for the starter rope to start the trimmer. It is made out of metal and it is sold individually.

This is an authentic OEM sourced replacement starter housing which is designed for use with Husqvarna lawn and garden equipment. It is the starter housing assembly which is used to pull-start the engine. It is a complete assembly which includes a durable plastic housing, starter pulley, starter spring, and the pull rope with the grip, please note the hardware to secure this assembly is sold separately.

It is a genuine component that is supplied by the original manufacturer to use for a Husqvarna trimmers. This part is made of steel and hard plastic. This part includes the drive pulley, rewind pulley, recoil spring and a drive spring. If the engine does not start, has a hard time starting or the pull rope does not retract then it is time to replace this part. Before replacing this part, please m...

This is a genuine manufacturer approved replacement part designed for use with Husqvarna chainsaws. The purpose of this rope is to allow user to to start the engine. Includes one (1) fabric rope per order. Please note the grip/handle is sold separately.

This is an authentic OEM part from Husqvarna for use with Line Trimmers. The recoil starter assembly spins the flywheel to start the engine. This assembly includes the recoil starter cover. The most common reason for replacing the starter assembly is if it is damaged or will not start the engine properly. This part is sold individually. The tool that you will need to replace the starter assembly i...

This is an authentic item that is supplied by the original equipment manufacturer for use with Husqvarna handheld lawn and garden equipment. It is an identical replacement for a missing or a faulty starter pawl that was installed on a new unit. The part is an important component of recoil starter mechanism, please make sure to refer to the appropriate diagrams of your model for the correct locatio...

This is a genuine Poulan, Husqvarna and Jonsered part for use with Chainsaws.The Recoil starter pulley spins the flywheel to start the engine. This part is sold individually. The most common reason for replacing the starter pulley is when it is broken or stuck, causing the rope to not rewind and the engine to not start. The tools that you will need to replace the starter pulley are a Torx head scr...

This is a genuine OEM part. The starter pulley assembly is composed of metal and plastic, and is made for use with many lawn and garden tools. This item is fitted into the starter assembly, pulling the starter rope back into place after starting the engine. The starter pulley assembly is sold individually.

This is an authentic OEM sourced replacement starter assembly, it is specially designed for use with Husqvarna handheld lawn and garden equipment. This is the starter assembly that is used to pull-start the engine. It includes a plastic housing, starter pulley, starter spring and the pull rope with the grip, please note the hardware to secure this assembly is sold separately. Over time any compone...

This starter pawl kit assembly is designed to engage the engine’s flywheel when the starter rope is pulled, enabling smooth and reliable starting. Built with durable materials to withstand repeated use, it includes the key internal components needed to support proper recoil function. Ideal for replacing worn or damaged starter parts, it helps restore consistent pull-start performance and dependable engine operation.

It is an authentic manufacturer-approved part which is specially produced for use with Husqvarna chainsaws. This replacement handle is attached to the rope of the starter assembly providing a user with a comfortable grip to easily start the engine. It is made of durable plastic and it is sold individually.

This is a genuine Husqvarna replacement part that has been sourced from the original manufacturer to be used with chainsaws, blowers, and brushcutters. The durable plastic handle is used to provide a grip at the end of the starter rope and to prevent the rope from recoiling entirely inside of the starter housing. This handle is available as an individual replacement part.

This part is an OEM sourced directly from the manufacturer for use in edgers and trimmers made by Husqvarna. The starter pulley goes next to the spring and is made of plastic. During the installation process, a screwdriver might be needed to replace this item. It may become broken and will need to be replaced. This is available as an individual replacement part.

It is a genuine OEM sourced starter cup spring that is specially made for use with Husqvarna trimmers and edgers. This replacement part provides spring action for the starter cup, for correct location and use of this item make sure to check appropriate diagrams of your unit. Over time the spring may lose its tension and need a replacement for the starter to function as intended by the manufacturer...

An authentic replacement starter handle which is supplied directly from the original equipment manufacturer for use with Husqvarna handheld lawn and garden equipment. This part is attached to the pull-rope to provide a user with a comfortable grip for starting the engine. It is a durable component which is made of high-quality plastic and it is sold individually.

This starter rope is an authentic OEM replacement part manufactured by Husqvarna. It is compatible with nearly 150 models of trimmers and brushcutters. This rope is attached to the starter pulley. When the rope is pulled, the starter pulley is rotated and the machine starts. This rope should be replaced if it is cut or begins to fray. It is sold individually.

This is an authentic manufacturer made replacement part which is specially designed for use with Husqvarna chainsaws. When the pull rope is engaged, the starter spring causes the engine turn fast enough for the ignition module to generate a spark to ignite the fuel in the cylinder. This part is made of metal and is sold individually. For installation you will need a screwdriver and socket wrench. ...

This replacement starter assembly is an authentic OEM supplied item that is specially designed for Husqvarna handheld lawn and garden equipment. It allows user to easily pull-start the unit. This assembly includes the plastic housing, starter pulley assembly and the pull rope with the grip, please note that the hardware to secure this assembly is sold separately.