Auger Springs and Shock Absorbers

This is a genuine replacement part manufactured for use with lawn and garden equipment. The starter pawl return spring returns the starter pawl to its normal position after pulling the starter rope. If the pawl spring wears out the pawl will remain engaged witht the starter pulley. The starter pawl return spring is sold individually.

This is an authentic replacement part which is manufactured for use with Tanaka handheld outdoor power equipment. The clutch along with the clutch drum allow a machine to idle without moving the drive shaft. When the throttle is engaged the clutch expands into the clutch drum which turns the drive shaft. If the clutch spring fails the clutch will not engage the drum and driveshaft, so the engine w...

This part is an OEM from Echo for use with Line and Hedge Trimmers. The throttle trigger spring attaches in the throttle housing and returns the trigger to the off position when you release the trigger. The most common reasons for replacing the throttle trigger spring is if the throttle is not functioning smoothly, no tension in the throttle trigger, the throttle lever is stuck at full throttle, t...

This is a genuine Echo replacement part used in compatible trimmers. The throttle lock spring attaches to the throttle trigger. It is made of metal and is priced as an individual replacement part. A screwdriver might be required during the replacement. This item may become bent or broken and will need to be replaced.