Screw the Tail Spindle (large extending part) off of the Tail Stock Screw.
Remove handle from tailstock by loosening a set screw.
The Tail Stock Screw is held in place by the C Ring - which you cannot access. The only way to get it out is to take a large, heavy hammer and, using a driving tool such as a thinner
... Read more steel rod, drive the Tail Stock Screw out from the back (handle side).
Put the new Tail Stock Screw, with the C Ring in place, in the tailstock from the front side and drive it back in using the hammer and driving tool. It will extend through - and when it \"clicks\" in place, all you have to do is attach the hand wheel (tighten the set screw) and thread the Spindle onto thte Tail Stock Screw.
Be sure to add dry lubricant before the Spindle goes back into the tailstock - this will keep it smooth and accurate.
Read less
Did you find this story helpful?
Thank you for voting!
Lead screw threads cross threaded needed new lead screw and tail spindle
Used a allen wrench to remove set screw from the handle,remove handle , then remove tail spindle and lead screw , replace with new tail spindle and lead screw, install handle and install set screw. Very easy. new parts fit perfect. Thanks.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of JT9-JWL1236-46 Jet TAIL SPINDLE")
_WW_1.gif "Part Location Diagram of JT9-JWL1236-46 Jet TAIL SPINDLE")
