Removed cross slide and entire carriage and apron from machine,had to remove hand wheel from front of apron to use large brass drift to punch shaft from installed position.... Needed to drill new hole in gear and gear shaft for use of hardware store supplied tapered pin #3 .Note: did not use roll(spring type) pin as supplied by E-repl.par
... Read morets... after drilling hole used tapered pin reamer to get hole prepped for pin. Installed shims on new gear shaft for proper spacing from backside of apron to the Rack gear on the lathe. Installed gear shaft into existing internal gear and drove new pin in place..... drained apron and flushed out foreign matter and refilled with proper oil and reinstalled in reverse of removal. Machine now works as it should. NOTE: lathe is a Enco and used replacement part for a Jet lathe and it works....Do your research and check pictures and cross-references and you will find parts are indeed available for discontinued machines. Thank you E-Replacement parts .
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19134859
Manufacturer Part Number: JT9-6214
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_10.gif "Part Location Diagram of JT9-6214 Jet GEAR SHAFT")
_WW_10.gif "Part Location Diagram of JT9-6214 Jet GEAR SHAFT")
