1. Remove brushes , base hold down allen screw, then all T15 torx screws.
2. Pry the plastic body apart with thin flat screw driver.
3. Unscrew 120v mains cord hold down.
4. Removed plastic switch toggle and white block with spring pin. remove small black bearing protector. remove switch and light.
5. Cut bad boar
... Read mored black and white wires as close as possible to circuit board. unplugged white wire from board.
6. Soldered new circuit board to black and white wires. plugged in white wire.
7. Install new switch and light and route wires in body.
8. Put body back together and screw torx screws, put back in brushes.
9. Plug in and turn on.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/parts/power-tool/jig-saw/circuit-boards-and-touch-pads/"},{"position":2,"name":"201754002","title":"201754002","url":""}]
