Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great service!
Easy to navigate web site. Found the needed parts from the helpful diagrams, ordered the parts which arrived quickly and it solved my problems.
Guest - May 9, 2019
Verified Purchase
★★★★★
★★★★★
bosch jigsaw 1587vs
parts received were genuine Bosch. my 20 year old saw runs as good as new due to new brushes . Blade lock mechanism is also like new. My experience was effortless as the sales person spoke so I could understand him and made that experience pleasant and efficient. Will go back again without question.Thank you.
Guest - July 7, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
They have utube videos that are very helpful
Guest - July 12, 2019
Verified Purchase
★★★★★
★★★★★
$11 in parts
Department store wanted $110 to repair saw. Followed directions on the video and saved $99.Thank you again !
Guest - August 28, 2019
Verified Purchase
★★★★★
★★★★★
Total satisfaction
Great blow-up diagrams and model specificity - easy to find what I needed, quick shipping.
Guest - February 18, 2020
Verified Purchase
★★★★★
★★★★★
Excellent customer service and online installation video. Easy repair and I am back up and running like new.
It was the exact OEM part from Bosch and very easy to install. Pricing was excellent and I received it very quickly.
Guest - August 18, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair...thanks
Part fit perfectly.....thanks
Guest - January 11, 2021
Verified Purchase
★★★★★
★★★★★
work good
got here quick
Guest - January 18, 2022
Verified Purchase
★★★★★
★★★★★
Fit perfectly
eReplacement always seems to have what I need with fast delivery.
Guest - February 21, 2022
Verified Purchase
★★★★★
★★★★★
Excellent
Easy ordering - speedy delivery - great instructional video - perfect fit - quick and complete repair
Guest - June 23, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Simply unscrewed the original screws, replaced the inner plastic piece that was stripped,
reset the spring, and placed the new handle back on top, then replaced all the screws.
The only thing I did not watch for, was to make sure the wires at the back side of the handle ran back into their allotted grooves. One of mine was sli
... Read moreghtly off, and this would not allow the handle to seat properly.
1. Remove 4 screws and take off old top handle.
2. Remove broken blade release gear
3. Push new gear on the shaft
4. Snap in new top handle
5. Replace assembly and tighten the 4 screws
Did you find this story helpful?
Thank you for voting!
SMALL SPRING INSIDE BLADE CHUCK WAS ALL CRUMPELED UP
Removed the top handle after removing the 4 screws. Installed the new parts with the old spring and the washer. Installed the new top handle, the 4 screws, then small turn handle to loosen and tighten the blades. Works like new. 21 years old but you wouldn\'t know it.
1. Removed screws from top and rear of handle assembly
2. Removed top handle assembly (There is a spring under the handle assembly. Not under any tension, just be aware and not lose it)
3. Straight forward repair with the parts that come with the new assembly
4. When installing new handle assembly make sure switch and wi
... Read moreres are in proper placement before tightening down screws to reinstall handle. I had to lift off the new handle and re-position my wires that had moved out of place. Just take care and it is a simple process.
5. Reinstall screws, check to make sure blade tightens correctly, and begin building on your next project.
Replaced the top handle assembly and the plastic lug thing that came with it. Watched the short video on the top handle assembly part page and just did what the guy said. It was quite easy. I had need of it several days this past week and it worked great.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
