Part Location Diagram of 270001603 Ryobi Assembly Switch
See part A-24 in the diagram
( Grid squares measure 1x1 inch )

Assembly Switch 270001603

Manufactured by:
Ryobi
ERP Number:
ERP11857043
Part Number:
270001603
Original Equipment Manufacturer ?
  Works with your model  P234G!
$24.55
Special Order

A Bit Difficult 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   P234G!

Troubleshooting

This part works with the following brands:
  • Ryobi
This part works with the following products:
  • Impact Driver
Part# 270001603 replaces these:
270001525,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Trigger spring did not return trigger to off position causing driver to continuously turn and drain batteries.

Glenn from Willis, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
270001603
1. Removed screws with applicable screwdriver (2 different size screw heads).
2. Split driver casing to reveal inner workings.
3. Confirmed that the trigger switch could not be reset or repaired without ordering new part(s).
4. Ordered applicable part from ereplacementparts.com, confirming correct trigger switch by cross referencing with my model of impact driver.
5. Once part arrived I confirmed it would replace current bad switch.
6. Used soldering gun to remove current switch from motor (De-soldering red and black wires from motor).
7. Soldered new switch wires to motor.
8. Tested the new switch to confirm it worked with battery prior to re-assembling.
9. Placed new switch and motor back in housing.
10. Assembled housing with applicable screws.
11. Inserted battery and tested new switch to confirm repairs were successful.
12. Works like new.
13. Noticed I forgot to add heat shrink tubing to electrical connections after re-soldering wire. However, the driver appears to work just fine so I will not be taking it apart again just for this, unless it creates a future problem.
14. All parts worked so well I have now ordered parts for my battery operated string trimmer (currently awaiting their delivery).
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11857043
Manufacturer Part Number: 270001603
Brand Model Number Description
Ryobi P234G Impact Driver - 18 Volt Impact Driver