Part Location Diagram of 230377002 Ryobi Assembly Motor
See part 22 in the diagram
( Grid squares measure 1x1 inch )

Assembly Motor 230377002

Manufactured by:
Ryobi
ERP Number:
ERP11857019
Part Number:
230377002
Original Equipment Manufacturer ?
  Works with your model  P236A!
$24.40
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(3 rated repairs) ?
  Works with your model   P236A!

Troubleshooting

This part works with the following brands:
  • Ryobi
This part works with the following products:
  • Impact Driver
Part# 230377002 replaces these:
230377001,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Motor was burnt out

James from Staten Island, New York

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
230377002
Remove screws from housing, remove only one housing half. Take a picture of how the parts are located, in case a few fall out. Remove motor and leads. Install new motor and leads. Assemble housing back together.
Did you find this story helpful?
Thank you for voting!

burnt motor

ROGER from WILLIAMSTOWN, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
230377002
pulled out old put in new
Did you find this story helpful?
Thank you for voting!

burned winding

GEORGE from oneonta, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
230377002
open case,
remove motor and gear set
remove ring gear
unbolt motor from gear case
un-solder the leads
solder in the new leads
reassemble
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11857019
Manufacturer Part Number: 230377002
Brand Model Number Description
Ryobi P236 Impact Driver - 18V Impact Driver
Ryobi P236A Impact Driver - 18 Volt Impact Driver
Ryobi P237 Impact Driver - 18 Volt Impact Driver