10084424-1-M-Ryobi-690258001-Retaining Ring

( Grid squares measure 1x1 inch )

10084424-1-S-Ryobi-690258001-Retaining Ring

10084424-2-S-Ryobi-690258001-Retaining Ring

10084424-3-S-Ryobi-690258001-Retaining Ring

10084424-1-S-Ryobi-690258001-Retaining Ring 360 view

Retaining Ring 690258001

Manufactured by:: Ryobi
ERP Number:: ERP10084424
Part Number:: 690258001

Works with your model NT18ID!

$4.13

★★★★★

1 Review

Delivers in 3-5 Business Days!

Minimum Quantity of 2 required

Easy

Less than 15 mins

(5 rated repairs) ?

Works with your model NT18ID!

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

This is a genuine OEM sourced replacement part that is intended to be used with impact drivers and jig-saws from Ryobi and Ridgid. The metal retaining ring is used to secure the sleeve and spring to the bit holder assembly. This item may require small nose pliers to install and it is priced as a single item.

Frequently Purchased Together

Steel Ball

★★★★★

(4)

$5.16

Washer Od 15.4xid12.4x1mm

$5.95

Minimum Quantity of 2 required

Spring

$4.13

Minimum Quantity of 2 required

Sleeve Opc-289

$6.15

Troubleshooting

This part works with the following brands:

Ryobi
Ridgid
Craftsman

This part works with the following products:

Impact Driver

Part# 690258001 replaces these:

690258001,

★

Customer Part Reviews

4.0

Average Rating (out of 5):

★★★★★

(1 Review)

Click to filter by ratings:

5 stars

0
4 stars

1
3 stars

0
2 stars

0
1 star

0

< Prev
1
Next >

Sort by:

★★★★★

Deliver what I order.

It was what I order , but could not find the correct part number for my Ryobi 3/8 impact wrench , model P263. The one I order was to big , looks like 1/2 inch. You guys deliver what I order so I happy for that. If you could help me find the correct part number.

Iglobal - February 25, 2022

Verified Purchase

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(5 rated repairs) ?

< Prev
1
Next >

Sort by:

retaining ring broke, lost ball and spring

Brad from WASHINGTON COURT HOUSE, Ohio

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 690268001, 690266001, 690261001, 690260003, 690258001

Simple to follow directions. Placed items on impact then used a eyeglass screwdriver to help me get the retaining ring on.

Did you find this story helpful?

Retainer broken

ed from South Elgin, Illinois

1 person found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 690266001, 690258001

Place parts in order and push down to set the retaining clip and test.

Did you find this story helpful?

Helping a friend build a greenhouse and he put a non-impact socket in my driver.

Joe from Kite, Georgia

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers
Parts Used:: 671562001, 690258001

Couldnt remove the socket and when I looked closer I could see the hex end of the socket had spun in the anvil. NOTHING I tried would remove the socket, so I ordered a new anvil and retaining ring and replaced both parts. All is fine now.
Oh, as a side note I worked for 8 years as a Tool Tech in the tool rental dept at The Big Oran ... Read more

Read less

Did you find this story helpful?

When I was drilling a hole in a wall top plate with a Patel bit on my impact, when the bit broke through the second board the collar jammed into the hole drilled the collar was pulled off the driver l

Jeffrey from Bossier city, Louisiana

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver
Parts Used:: 690268001, 690258001

I use my 5/16 nut driver to push the retaining ring down and rotate to mount the ring. DONE

Did you find this story helpful?

Replacement

Victor from Bayamon, Puerto Rico

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 690266001, 690258001

Pressed the washer in
Then installed the retaining ring

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP10084424
Manufacturer Part Number: 690258001

Brand	Model Number	Description
Craftsman	315114030	Boring Machine - Drill
Craftsman	315114831	Impact Driver - Impact Drill
Craftsman	315114832	Cordless Drill - Drill
Craftsman	315115460	Impact Driver - 14.4 Volt Impact Driver
Craftsman	315116060	Cordless Drill - Drill Driver
Ryobi	NT18ID	Impact Driver - Impact Driver
Ryobi	P230	Impact Driver - 18V Impact Driver
Ryobi	P231	Impact Driver - 18V Impact Driver
Ryobi	P232	Impact Driver - 18V Impact Driver
Ryobi	P234	Impact Driver - 18 Volt Impact Driver
Ryobi	P235	Impact Driver - 18 Volt Impact Driver
Ryobi	P236	Impact Driver - 18V Impact Driver
Ryobi	P236A	Impact Driver - 18 Volt Impact Driver
Ryobi	PSL0D181	Impact Driver - Power Stroke 18 Volt Impact Driver
Ridgid	R82233	Impact Driver - Cordless Impact Driver
Ridgid	R8223407	Jig Saw - Jobmax Jig Saw Head
Ridgid	R82234071	Jig Saw - Jobmax Jigsaw Head
Ridgid	R82320	Impact Driver - Impact Driver
Ridgid	R84230	Impact Driver - Cordless Impact Driver
Ridgid	R842301	Impact Driver - Cordless Impact Driver
Ridgid	R86230	Impact Driver - Cordless Impact Driver
Ridgid	R8823	Impact Driver - Cordless Impact Driver