11878486-1-M-Milwaukee-45-24-0130-Forward/reverse Shuttle

( Grid squares measure 1x1 inch )

11878486-1-S-Milwaukee-45-24-0130-Forward/reverse Shuttle

Forward/reverse Shuttle 45-24-0130

Manufactured by:: Milwaukee
ERP Number:: ERP11878486
Part Number:: 45-24-0130

Works with your model 2764-22!

$6.16

Delivers in 3-5 Business Days!

Minimum Quantity of 2 required

Easy

15 - 30 mins

(3 rated repairs) ?

Works with your model 2764-22!

Jump to:

Description Troubleshooting Repair Instructions Model Cross Reference

Product Description

This is a genuine Milwaukee replacement part. The forward/reverse shuttle is designed by the manufacturer for use in impact wrenches. This part is made of high-quality plastic, and is used to adjust the direction of the machine. You will require a screwdriver when replacing this item. This part is sold individually.

Troubleshooting

This part works with the following brands:

Milwaukee

This part works with the following products:

Impact Driver
Wrench

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

15 - 30 mins

(3 rated repairs) ?

< Prev
1
Next >

Sort by:

Broken spring plate that holds the forward/reverse shuttle button in position.

Mike from Manhattan, Kansas

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Parts Used:: 45-24-0130, 40-50-0027

Separated two halves, installed parts, reassembled. Feedback from end user indicated that it works better than when it was new.

Did you find this story helpful?

The forward/reverse shuttle did not have any detents. It would just flop back and forth. The spring plate was missing in action

Joe from Juneau, Alaska

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 45-24-0130, 40-50-0027

1. Removed torx head screws holding the 2 halves of impact together
2 Pulled out shuttle/trigger assembly
3 Installed new spring plate
4 Installed new shuttle w/ old trigger assembly
5 CLEAN OUT INSIDE WITH COMPRESSED AIR
6 Reassemble the 2 halves of the case. Test.

Did you find this story helpful?

Forward / reverse was stuck

Kurt from BREESE, Illinois

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 45-24-0130, 40-50-0027

Removed all screws holding the housing together . Then separated the impact wrench so I could replace the spring in the forward/reverse switch and the forward/reverse switch itself. Once everything was in place I reassembled the impact wrench.

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP11878486
Manufacturer Part Number: 45-24-0130

Brand	Model Number	Description
Milwaukee	2762-059	Impact Driver - Impact Driver
Milwaukee	2762-20	Impact Driver - M18 Fuel 1/2" Square Impact Wrench with Detent Pin
Milwaukee	2762-22	Impact Driver - M18 Fuel 1/2" Square Impact Wrench with Detent Pin
Milwaukee	2763-059	Impact Driver - Impact Driver
Milwaukee	2763-20	Impact Driver - 1/2" Square Impact Wrench
Milwaukee	2763-22	Impact Driver - M18 Fuel 1/2" Square Impact Wrench with Friction Ring
Milwaukee	2764-059	Impact Driver - Impact Driver
Milwaukee	2764-20	Impact Driver - M18 Fuel 3/4" Square Impact Wrench with Friction Ring
Milwaukee	2764-22	Impact Driver - M18 Fuel 3/4" Square Impact Wrench with Friction Ring
Milwaukee	2765-059	Impact Driver - Impact Driver
Milwaukee	2765-20	Impact Driver - M18 Fuel 7/16" Quick Connect Impact Wrench
Milwaukee	2765-22	Impact Driver - M18 Fuel 7/16" Quick Connect Impact Wrench