Part Location Diagram of 43-44-0065 Milwaukee Gasket
See part A-19 in the diagram
( Grid squares measure 1x1 inch )

Gasket 43-44-0065

Manufactured by:
Milwaukee
ERP Number:
ERP11878115
Part Number:
43-44-0065
Original Equipment Manufacturer ?
  Works with your model  2765-059!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(3 rated repairs) ?
  Works with your model   2765-059!

Product Description

?

This is an original part from the Milwaukee manufacturer. The gasket is composed of cardboard composite, and is sold individually. Compatible with several impact wrenches, the gasket is fitted onto the rear case, providing protection from friction. You will need a screwdriver and pliers for the removal and replacement.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Impact Driver
  • Wrench

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Anvil drive broke off

Isaac from Ormsby, Minnesota

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
43-44-0065, 42-06-0047
Removed nose cone screws and screws in handle. Then split handle keeping inside components on one side of handle. Removed nose cone containing anvil, washers, washer bearing and small steel ball. Replaced anvil and reassemble again.

Note: Remember where parts go while tool is being disassembled. Don\'t lose the little st eel ball! Lube parts with grease.
Did you find this story helpful?
Thank you for voting!

Anvil broke

Brandon from MAN, West Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
43-44-0065, 42-06-0047
Removed end cap from impact, removed anvil and replaced
Did you find this story helpful?
Thank you for voting!

Broken anvil

john from Haworth, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
43-44-0065, 42-06-0047
Removed housing from gun, put in replacement anvil, piece of cake, Very impressed with your service, have recommended you to others, and will no doubt use Replacement parts again
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11878115
Manufacturer Part Number: 43-44-0065
Brand Model Number Description
Milwaukee 2762-059 Impact Driver - Impact Driver
Milwaukee 2762-20 Impact Driver - M18 Fuel 1/2" Square Impact Wrench with Detent Pin
Milwaukee 2762-22 Impact Driver - M18 Fuel 1/2" Square Impact Wrench with Detent Pin
Milwaukee 2763-059 Impact Driver - Impact Driver
Milwaukee 2763-20 Impact Driver - 1/2" Square Impact Wrench
Milwaukee 2763-22 Impact Driver - M18 Fuel 1/2" Square Impact Wrench with Friction Ring
Milwaukee 2764-059 Impact Driver - Impact Driver
Milwaukee 2764-20 Impact Driver - M18 Fuel 3/4" Square Impact Wrench with Friction Ring
Milwaukee 2764-22 Impact Driver - M18 Fuel 3/4" Square Impact Wrench with Friction Ring
Milwaukee 2765-059 Impact Driver - Impact Driver
Milwaukee 2765-20 Impact Driver - M18 Fuel 7/16" Quick Connect Impact Wrench
Milwaukee 2765-22 Impact Driver - M18 Fuel 7/16" Quick Connect Impact Wrench