Part Location Diagram of 42-06-0047 Milwaukee 1/2 Square Anvil Assy. W/fric
See part A-66 in the diagram
( Grid squares measure 1x1 inch )

1/2 Square Anvil Assy. W/fric 42-06-0047

Manufactured by:
Milwaukee
ERP Number:
ERP11877773
Part Number:
42-06-0047
Original Equipment Manufacturer ?
  Works with your model  2763-059!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   2763-059!

Product Description

?

The square anvil assembly with the friction ring fits next to the shift shaft o-ring. This part is an OEM from Milwaukee for use in square impact wrenches and is available as an individual replacement part. It is made of metal and may require long torx bit sockets in order to do the replacement.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Impact Driver

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Anvil drive broke off

Isaac from Ormsby, Minnesota

6 of 6 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
43-44-0065, 42-06-0047
Removed nose cone screws and screws in handle. Then split handle keeping inside components on one side of handle. Removed nose cone containing anvil, washers, washer bearing and small steel ball. Replaced anvil and reassemble again.

Note: Remember where parts go while tool is being disassembled. Don\'t lose the little st eel ball! Lube parts with grease.
Did you find this story helpful?
Thank you for voting!

Anvil broke

Brandon from MAN, West Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
43-44-0065, 42-06-0047
Removed end cap from impact, removed anvil and replaced
Did you find this story helpful?
Thank you for voting!

The housing was worn out where the battery slides on and the square drive loose on the sockets

Raymond from CORPUS CHRISTI, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Took all the screws out
Take a picture make note of how the wiring is ran threw the housing
Remove and used a blow gun to remove dirt off of moter
Pulled front housing off and put drive in
Lightly grease and put back together
Put the clear plastic pieces in both housings where the moter sits
Transfe r parts over and carefully put together
Don\'t forget the little detent clip under the foward/reverse button
Tighten screws event watching for wires
Did you find this story helpful?
Thank you for voting!

Broken anvil

john from Haworth, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
43-44-0065, 42-06-0047
Removed housing from gun, put in replacement anvil, piece of cake, Very impressed with your service, have recommended you to others, and will no doubt use Replacement parts again
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11877773
Manufacturer Part Number: 42-06-0047
Brand Model Number Description
Milwaukee 2655B-20 Impact Driver - M18 Fuel 1/2" Square Impact Wrench
Milwaukee 2655B-22 Impact Driver - M18 Fuel 1/2" Square Impact Wrench
Milwaukee 2763-059 Impact Driver - Impact Driver
Milwaukee 2763-20 Impact Driver - 1/2" Square Impact Wrench
Milwaukee 2763-22 Impact Driver - M18 Fuel 1/2" Square Impact Wrench with Friction Ring