_WW_1.gif "Part Location Diagram of 34-60-0725 Milwaukee Retaining Ring - Ext")
Jump to:
This external retaining ring, also known as a snap ring or circlip, is supplied by the original manufacturer for use in impact drivers. It helps to secure the collar in the front housing assembly. It should be replaced if it is lost, damaged, or no longer able to remain securely attached. To replace the retaining ring, disassemble the front housing assembly and pull out the ring. Position the new ring in its place and reassemble the housing. Each retaining ring is sold individually.
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The sleeve that retains the bit broke in half so the 3mm ball fell out and would not retain the driver bit
M from Branford, Florida
broken collet
Greg from AMELIA, Ohio
Customer took it apart and lost parts
Carri from PORT WING, Wisconsin
Replacement of broken collar
Allen from El Sobrante, California
| Brand | Model Number | Description |
|---|---|---|
| Milwaukee | 0881-20 | Impact Driver - 1/4" Hex Impact Driver |
| Milwaukee | 2453-059 | Impact Driver - Impact Driver |
| Milwaukee | 2453-20 | Impact Driver - Hex Impact Driver |
| Milwaukee | 2453-22 | Impact Driver - M12 Brushless 1/4" Hex Impact Driver |
| Milwaukee | 245320 | Impact Driver - M12 Brushless 1/4" Square Impact Driver |
| Milwaukee | 2455-20 | Cordless Drill - Cordless 12 Volt No-Hub Coupling Driver-Drill |
| Milwaukee | 2455-22 | Cordless Drill - Cordless 12 Volt No-Hub Coupling Driver-Drill |
| Milwaukee | 245520 | Cordless Drill - Cordless 12 Volt No-Hub Coupling Driver-Drill |
| Milwaukee | 2551-20 | Impact Driver - M12 Fuel Surge 1/4 Hex Hyd Drv |
| Milwaukee | 2553-20 | Electric Drill - Electric Drill |
| Milwaukee | 2650-059 | Impact Driver - Impact Driver |
| Milwaukee | 2650-20 | Impact Driver - 18 Volt 1/4" Hex Impact Driver |
| Milwaukee | 2650-21 | Impact Driver - 18 Volt 1/4" Hex Impact Driver |
| Milwaukee | 2650-22 | Impact Driver - 18 Volt 1/4" Hex Impact Driver |
| Milwaukee | 2652-20 | Impact Driver - 18 Volt 1/2" 34 Square Impact Driver |
| Milwaukee | 2652-22 | Impact Driver - 18 Volt 1/2" Square Impact Driver |
| Milwaukee | 2653-20 | Impact Driver - Hex Impact Driver |
| Milwaukee | 2656-20 | Impact Driver - M18 1/4" Hex Impact Driver Single Speed |
| Milwaukee | 2656-22 | Impact Driver - Impact Driver |
| Milwaukee | 2656-22CT | Impact Driver - 2656-22ct (Serial F26c) M18 1/4-Inch Hex Impact - Single Speed Parts |
| Milwaukee | 2657-059 | Impact Driver - M18 2-Speed 1/4 Inch Hex Impact Dr |
| Milwaukee | 2657-20 | Impact Driver - M18 1/4" Hex Impact Driver Two Speed |
| Milwaukee | 2657-22 | Impact Driver - M18 1/4" Hex Impact Driver Two Speed |
| Milwaukee | 2657-22CT | Impact Driver - M18 1/4" Hex Impact Driver Two Speed |
| Milwaukee | 2750-20 | Impact Driver - M18 Brushless 1/4 |
| Milwaukee | 2750-22CT | Impact Driver - Impact Driver |
| Milwaukee | 2753-20 | Impact Driver - 1/4" Hex Impact Driver (Baseline) |
| Milwaukee | 2753-22 | Impact Driver - Impact Driver |
| Milwaukee | 2753-22CT | Impact Driver - Impact Driver |
| Milwaukee | 2760-20 | Impact Driver - M18 Fuel Surge - Bare |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 34-60-0725 Milwaukee Retaining Ring - Ext")
