Part Location Diagram of 537286307 Husqvarna CLUTCH COVER ASSEM, GREY

See part C-13 in the diagram

CLUTCH COVER ASSEM, GREY 537286307

Manufactured by:: Husqvarna
ERP Number:: ERP18524819
Part Number:: 537286307

$62.95

Delivers in 3-5 Business Days!

Easy

Less than 15 mins

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Repair Instructions

Troubleshooting

This part works with the following brands:

Husqvarna

Part# 537286307 replaces these:

537286301, 537286302, 546347401, 546354301,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(4 rated repairs) ?

< Prev
1
Next >

Sort by:

Original clutch cover got too hot, melted so the chain brake would not release.

Mark from Enterprise, Alabama

6 of 6 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers
Parts Used:: 537286307

1. Removed old cover from chainsaw with the chainsaw tool.
2. Installed new clutch cover, tightened the chain tension.
3. Started the saw, runs perfectly.

Best value and price on an OEM part for my Husqvarna 455 Rancher chainsaw!

Did you find this story helpful?

My Husqvarna chain saw was binding up and the blade would not rotate

Earle from Huntingtown, Maryland

4 of 5 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Parts Used:: 537286307, 503220001

1. I determined the motor itself was fine by removing the side cover and bar/blade and running the chainsaw.
2. I removed the old side cover which appeared to have excessive wear in a few areas.
3. I put on the bar and chain and fitted the new cover in place.
4. I adjusted the tightness of the blade and made sure the cha ... Read more

Read less

Did you find this story helpful?

Clutch jammed .

Billy from HAVELOCK, North Carolina

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Wrench set
Parts Used:: 537286307

Removed 2 holding nuts on the clutch cover and removed from chain saw. Placed new clutch cover on chain saw and tightened the 2 holding nuts. Job finished.

Did you find this story helpful?

Chain brake wouldn\'t disengage and wouldn\'t line up with clutch cover

Donnie from Minnetonka, Minnesota

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Wrench set
Parts Used:: 537286307, 537284301

I simply removed the old hand guard and clutch cover and replaced them with the new parts. Everything lined up perfectly and reassembly was a breeze. Now my chainsaw is as good as new. I am a very satisfied customer!

Did you find this story helpful?

< Prev
1
Next >