This authentic OEM sourced replacement switch is produced for use with Black and Decker and Dewalt hedge trimmers. Its function is to allow user to turn the equipment on and off. Because switches use mechanical internals, they will degrade and wear out eventually requiring replacement. Please note one durable plastic switch is included per order.
Troubleshooting
This part works with the following brands:
Black and Decker
Craftsman
DeVilbiss
This part works with the following products:
Hedge Trimmer
Part# 90541380 replaces these:
90541380
P90541380
★
Customer Part Reviews
?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(8 Reviews)
Click to filter by ratings:
5 stars
7
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
B&D trimmer switch
Right price. Shipping delayed a day or two. Perfect fit.
Guest - May 1, 2019
Verified Purchase
★★★★★
★★★★★
Great deal.
Exactly what I ordered and fixed my problem way cheaper than getting a new weed eater.
Guest - May 4, 2019
Verified Purchase
★★★★★
★★★★★
Great company, solid replacement part!
This Black and Decker Hedge Hog hedge trimmer replacement switch was actually a second time that I chose to replace it on my trimmer. I use my trimmer regularly, so this was a second time replacement in about 3 or so years, I believe?
As for eReplacement Parts....I've used this online company a lot and have always been pleased with their support. I haven't really checked their price points, but given the price of gasoline these days, ...and, the headaches of running around in traffic...I've found the cost of doing business with eReplacement Parts still a good deal.
Guest - May 30, 2019
Verified Purchase
★★★★★
★★★★★
Easy Repair
The part arrived fast and we were back in business=ƒæì
Guest - August 19, 2019
Verified Purchase
★★★★★
★★★★★
The correct part, easy replacement and great experience
I was very please with the part I received as it was the correct part and was able to change it out and be back to working with my tool quickly with little ease!
Guest - August 18, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair, was the exact part as shown
Was the exact part that I needed, it fit perfectly, and the hedge trimmer is up and running once again.
Guest - August 20, 2021
Verified Purchase
★★★★★
★★★★★
Remove & Replace easy peezy!
The part was brand new. Easy to repair. =ƒÿÇ
Raymond - September 13, 2022
Verified Purchase
★★★★★
★★★★★
a little late
Arrived a few days late, but overall a good purchase
Bill - October 30, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1) Removed the screws to the handle, the guide, and the casing.
2) Slowly pulled apart
3) Compared new switch to old switch to make sure correct part and the direction it goes in.
4) Removed old switch and unplugged it one wire at a time and connected them to the new switch as I removed them (only two wires).
5) Pu
... Read moret the new switch in place.
6) Put the casing back together, the guide, and the handle.
Upon receiving the replacement switch I installed the new switch in just few seconds. It was easy to replace the switch, but took some time to put the case back together. The trimmer is working great and I did not have to throw it away and buy another. The part was a perfect fit.
Following your guidelines to diagnose the problem, ordered the parts (brushes and switch).
Remove screws holding 2 halves of the body together. Separate the 2 plates, exposing the motor. Carefully pull out the end portion of the light springs holding the brushes in their channel with a fine tweezer. Remove the brushes utilizing gra
... Read morevity (tip motor and tap gently). Place new brushes into in their channels and reposition the holding springs onto the ends of each brush. Lift the switch off its plastic \"pillars,\" remove wires connected to it. Attach wires, as before, to new switch and slip new switch back into place. Screw 2 halves of the plastic body back together.
1 Received new switch from Replacement Parts (wasn\'t sure that I could get one).
2. Removed about 12 screws holding the trimmer together.
3. Removed old switch and inserted new (electrical connections made it easy).
4. Put screws back in.
5. Tested trimmer and it worked great!
Made sure the hedgehog was unplugged. Removed the eight or 10 screws with a flat screwdriver. Took a picture of the components so I would know how they fit in case they shifted around. Removed the old switch and inserted the new switch. I was going to also replace the brushes, but it looked a little tedious so I reassembled and it started
... Read more right up and ran beautifully. So I have two brushes in my inventory should I need them in the future. Received parts in five days and I am ready for summer trimming. 15 min job. Thank you!!!!
disassembled hedger
removed broken switch
observed common wire from electric plug in detached
soldered common wire onto brush commutator
greased and cleaned hedger while disassembled
in ordering parts brushes (plural) ordered, seller delivered brush (singular) not a pair of brushes, so installed old br
... Read moreushes and did not use the 1 new brush delivered. in the future, if I do this repair again will cut out switch, solder wires together and fabricate replacement brushes from a piece of carbide
all in all repair easy but did not expect broken wire --- trimmer running perfect like new
Read less
Did you find this story helpful?
Thank you for voting!
Hedge Hog 24\" trimmer was intermittent when running and stopped operating when shifted up and down.
I opened the plastic case with Phillips and Torx drivers;
I noted the two severely worn brushes and a broken wire from the switch to the armature -- resoldered it. I found that sometimes the switch worked properly and sometimes it didn\'t. I replaced both brushes (first raising the small brass retainer springs) and replaced the sw
... Read moreitch and then reassembled the case and had the same intermittent running problem as before when the unit was turned, shifted and extended during use.
I then opened the unit again and carefully studied the pig-tail power cord. I used my volt/ohmmeter to find an intermittent short in continuity due to a broken white wire in the cord. I removed the old power cord, inserted the new power cord, attached the black wire to the switch. I shortened and stripped the end of the original white wire to the armature winding wire and then used a small wire nut to connect the two ends of the white wires in the handle and reassembled the unit. It works perfectly now without any problems.
Thanks for your videos and informative website.
Tom S.
Read less
Did you find this story helpful?
Thank you for voting!
The hedge trimmer motor quit working when attached to an electrical resource
*Remove all the screws from the external casing.
*With a small screw driver pry the old switch off of the two plastic prongs that hold the old switch in place. This is a delicate process for you do not want to break of the plastic prongs.
*Detach the two electrical wires that connect to the old switch
*Reattach these tw
... Read moreo wires to the new switch.
Reinsert the new switch onto the plastic prongs
Re-insert all casing screws.
Task completed.
Removed about 10 T11 screws from the body to expose the internal parts, saw switch housing was broken so ordered a replacement, connected the new switch to the 2 wires and reattached the 10 T11 screws.
I filled the edge of the safety trigger release so the switch had a smoother slide to turn on.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10022803
Manufacturer Part Number: 90541380
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
