Part Location Diagram of S82229000 Broan Obe105854 Nt Srv Asm Power Uni
See part A-5 in the diagram
( Grid squares measure 1x1 inch )

Obe105854 Nt Srv Asm Power Uni S82229000

Manufactured by:
Broan
ERP Number:
ERP10280018
Part Number:
S82229000
Original Equipment Manufacturer ?
  Works with your model  9451!
$194.82
Special Order

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   9451!

Product Description

?

This authentic manufacturer-sourced part is specially designed for Nutone ceiling heaters. It is the main unit that produces the airflow. This assembly includes a motor, a bracket, and a metal impeller wheel. Note, the hardware to secure the power unit is sold separately. Check the appropriate diagrams for your model for the correct installation. To replace it you will need a wrench set and a screwdriver. You will need to remove the grille cover, unscrew the old power unit and replace it with the new one. Make sure to disconnect the motor from the power source before beginning the repair.

Troubleshooting

This part works with the following brands:
  • Nutone
  • Broan
This part works with the following products:
  • Heater

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Fan motor burnt out

kenneth from hull, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
S82229000
Remove cover and bulbs, unscrewed motor bracket removed old motor,replaced with new motor plug in reinstall bulbs and cover. DONE
Did you find this story helpful?
Thank you for voting!

Old blower fan made screeching noise and nearly burned out

Christian from MINNEAPOLIS, Minnesota

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
S82229000
Removed the old blower by unplugging its power cord from a 2 prong socket within the Heat-a-Vent , then unscrewing 2 sheet metal screws that secured the blower brackets to the steel housing, then pulling out the blower.
Inserted the replacement blower , which exactly matched the previous one , attached it with the same sheet metal s crews through the notches in the brackets, then plugged the power cord plug into the socket.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10280018
Manufacturer Part Number: S82229000
Brand Model Number Description
Nutone 9415 Heater - Ceiling Heater
Nutone 9415F Heater - Ceiling Heater
Nutone 9415H Heater - Ceiling Heater
Broan 9415N Heater - Heat-A-Vent - 50 Cfm / 3.0 Sones
Nutone 9425 Heater - Ceiling Heater
Nutone 9425F Heater - Ceiling Heater
Nutone 9425H Heater - Ceiling Heater
Broan 9425N Heater - Bulb Heater/Fan - 50 Cfm / 2.5 Sones
Nutone 9451 Heater - Ceiling Heater
Nutone H925 Heater - Ceiling Heater