This authentic replacement rocker switch is supplied directly from original manufacturer. It is specially made for use with DeLonghi heaters. It controls the on/off functions of a unit. Switches are commonly replaced parts, over time, mechanical internals will wear out requiring replacement. This plastic switch is sold individually. To complete this repair you will need a screwdriver. • First make sure the tools is not plugged in • Then you want to remove the cover screws • Remove the old switch • Secure the new switch in place • Reassemble and test the unit
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Switch for oil filled space heater
Part was received as described. Fast shipping. Working great so far. Thanks.
Guest - December 23, 2021
Verified Purchase
★★★★★
★★★★★
Thanks eReplacementParts
The switch is an exact replacement. Removed the old and installed the new. The heater is working again.
Guest - January 7, 2022
Verified Purchase
★★★★★
★★★★★
Easy Repair.
The switch, arrived and was installed quickly, putting the device back in service .
Guest - January 26, 2022
Verified Purchase
★★★★★
★★★★★
Perfect replacement part
Just the exact part I needed Fairly easy to install. Works great
Anonymous - February 14, 2022
Verified Purchase
★★★★★
★★★★★
The replacement part made for an easy repair.
The replacement part I received from your company was exactly what I needed to repair my heater and get it operational again. Thanks very much.
Guest - February 19, 2022
Verified Purchase
★★★★★
★★★★★
30yr old heater works again
The part arrived, exact duplicate, fit 30yr old heater, heater works great.
Guest - December 5, 2022
Verified Purchase
★★★★★
★★★★★
Repeat customer happy again
Switch fell apart but heater worked well. So happy to find original switch and get the heater for functioning again. Modest cost and fast shipping made this a satisfying repair. Thank you!
Robert - December 14, 2022
Verified Purchase
★★★★★
★★★★★
right part,easily installed ,ok price.
switch recieved in good condition
exact match of old part
Guest - December 2, 2019
Verified Purchase
★★★★★
★★★★★
Surprise, surprise, surprise!
The picture did not do the replacement part justice, the picture looked nothing like the part I needed, but boy was I surprised! Not only was the part exactly right, it went into place easier than the comments suggested. Pay attention to detail (when removing the old part) and you too will be amazed. The part works just like the original and it is impossible to tell the difference in appearance. GOOD JOB!
JACK - February 20, 2020
Verified Purchase
★★★★★
★★★★★
helpful reps. I had to call for help and the woman was great - Halifax NS I think.
then part arrived promptly and was easy to install. New life for an otherwise good space heater that I might have had to throw away!
thank you.
Guest - March 9, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Before disconnecting, I took pictures of the electrical connections with my smart phone. Then it was just a matter of reconnecting the correct wires to the proper terminals and re-installation of the switch and panel holding the switch to the heater.
1. Unplugged heater from wall (low wattage switch still worked)
2. Removed housing.screw inorder to remove housing.
3. Unplugged wires from old switch
4. Removed old switch from housing.
5. Installed new switch in housing
6. Reattached wires in proper order with finger tips
7. Reattach housing
8
... Read more. Tighten housing screw
9. Plug heater in wall outlet
10. Turn heater on with new double switch. Works Great
Unscrew the face and bend the 8 plastic wings in. Remove the front plate. Press down on the clips on the switch and pull out. Disconnect the wires one at a time and put on the new switch. Snap the new switch into the front plate. Snap the front plate into the metal front and screw metal front back on heater. Quick fix.
Unplugged heater, draw diagram of wiring, remove one screw lift off panel containing
bad switch remove wiring,compress switch locks and remove., install new switch and
replace panel..
1. Unplugged heater.
2. Removed screw holding cover to heater that had switch mounted on it.
3. Removed wires from old switch that are in pairs of two. The wires stayed in position for re-connection ,
4. Squeezed clips on old switch while pushing it out of cover.
5.Pushed new switch in until clips snapped in place
... Read more. Replaced wires onto switch.
6.Screwed cover back on. Plugged in and turned on with success.
Ordered my part on day one of a 2 foot snow storm and still got it in 4 days. Thank you.
1: Removed one Phillips head screw from side panel.
2:Pull panel away from unit just far enough to reach cables attached to switch.
3:Gently pull cables off of the switch, keeping them in order for replacement on new switch.
4:Push old switch out of panel from cable side.(may need a little tap)
5:Snap new switch
... Read moreinto panel from the front.
6:Reattach cables in the same order they were originally found.
7:Replace panel, catching bottom lip first, and then pushing in the top.
8:Replace screw and your ready to try it out.
Removed 1/4\" bolt holding control panel in place. Marked location of wires on existing switch. Disconnected wires and removed switch using flat head screwdriver to pry retaining prongs loose. Snapped new switch into position. Re-attached wires in their proper location. Re-attached control panel. Everything worked.
Removed the end panel from the heater, took a picture of the wiring scheme on the original switch to make ensure accuracy in installing the new switch, replaced the switch, and then reattached the end panel.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
