This replacement keyless chuck is an authentic OEM sourced component which is specially designed for use with Dewalt drills. Its purpose is to secure a drill bit, the ratcheting action clicks the jaws tightly into place for reduced bit slippage. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. This high-quality component is sold individually, please note the screw to secure it is sold separately.
Troubleshooting
This part works with the following brands:
DeWALT
This part works with the following products:
Hammer
Hammer Drill
Electric Drill
Cordless Drill
Boring Machine
Videos For installing this part.
?
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Opened chuck, removed T-20 Torx retaining screw by turning clockwise (reverse threaded)
2. Tried technique shown in YouTube videos that uses an Allen wrench and hammer to break loose the chuck. I attempted this for a few minutes, but it never did work.
3. Put a 3/8\" hex shaft into chuck, then used an impact wrench with 3/
... Read more8\" socket to break loose the chuck; worked like a charm. I strongly recommend this approach if you have the hex shaft and impact wrench. It was very quick and very easy.
4. Unscrewed the chuck (counterclockwise).
5. Screwed on the new chuck and tightened.
6. Screwed in new Torx retaining screw and tightened by hand.
Removed the reversed thread screw from inside the chuck that holds the chuck to the drill shaft and keeps it from coming off during use. Once the screw is out, the chuck screws off of the drill shaft and you replace with new one. If by chance the inside screw will not break loose or the head is damaged, lay the drill on side of table a
... Read morend use pipe wrench to turn chuck counter clock wise and this will break the holding screw, once the chuck is off remove the portion of screw in drill shaft then replace with new chuck and new screw.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
