Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Drill chuck
Fast service...right part
Guest - March 11, 2020
Verified Purchase
★★★★★
★★★★★
Bosch Replacement Chuck.
The replacement chuck & key on the Bosch Rotary hammer works better than the original. I’m a weekend warrior & this has to be 14 years old.
Guest - April 15, 2020
Verified Purchase
★★★★★
★★★★★
Revived a dead drill
New chuck and cord cost about what a new hammer drill would cost - BUT the new drill a much lighter duty tool from a different manufacturer. Glad I just got the new parts. Now my Bosch hammer drill works like new. Quick turnaround from ordering to receiving. I'll definitely work with eReplacement Parts again!
Guest - November 9, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
The schematic drawing made finding the part very easy and the part was delivered on time. It was a perfect fit.Thanks
Guest - July 30, 2022
Verified Purchase
★★★★★
★★★★★
yes it did
fast shipment, thank you
Guest - January 10, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
REMOVED CHUCK. MINE WAS MISSING THE LOCK SCREW INSIDE THE CHUCK. THIS WILL HAVE TO BE REMOVED FIRST. USUALLY REVERSE THREAD.
NEXT, TIGHTENED A LARGE ALLEN WRENCH IN CHUCK, THEN WHACKED ALLEN WRENCH WITH A HAMMER, WHILE HOLDING SHAFT CHUCK IS ATTACHED TO, WITH A THIN OPEN ENDED WRENCH. REPLACED CHUCK.
CORD AND GROMMET SIMPLE, S
... Read moreTANDARD REPLACEMENT PROCEDURE.
1. On the drill; open chuck all the way to access and remove the Philips head screw which has \"reverse threads\".
2. Put shorter end of a large Allen wrench in the chuck and tighten.
3. Use the Allen wrench to unscrew the chuck from the drill by hitting it sharply with a rubber hammer. (The chuck has standard threads).
... Read more>4. Install new chuck in reverse order.
My Bosch drill ( 1194AVSR ) is old, ( approx. 20 yr.\'s old and not used much as I work for companies with supplied equipment ).
Semi retired now and it needed a fix up for use.
The chuck did not have a retainer screw as I found out after drilling out the stop end ( like many I thought the retainer screw was stripped ).
... Read moreI used the proper wrench on the shaft before the chuck, used a 1/2 hex key in the chuck, and with a small breaker bar while supporting the drill, the old chuck broke free.
The replacement parts ( no retainer screw needed ) are functioning properly.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19501256
Manufacturer Part Number: 1608571069
Electric Drill
- TYPE 1 (F01200) 1/2 in. Electric Hammer Drill
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
