This part is an OEM from the Milwaukee manufacturer. The keyless chuck is constructed of high-quality metal with a plastic grip. The chuck is fitted onto the gearbox assembly, and is designed to hold the bits and tools necessary for projects. This item is sold individually. It is recommended to refer to the specific manual for further instructions.
Troubleshooting
This part works with the following brands:
Milwaukee
This part works with the following products:
Hammer Drill
Cordless Drill
Part# 42-66-0023 replaces these:
42-66-2607,
★
Customer Part Reviews
?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(12 Reviews)
Click to filter by ratings:
5 stars
11
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Had to reorder the screw do to getting the wrong one the 1st time.
Was a easy repair the oem screw had broken off and I decided to replace the chuck also.
Joe - June 10, 2019
Verified Purchase
★★★★★
★★★★★
Milwaukee 1/2" keyless Chuck replacement
Good product with solid build at a good price.
Guest - August 16, 2019
Verified Purchase
★★★★★
★★★★★
Good part
Delivery time was great, chuck went on good and works good, thanks.
Joseph - November 27, 2019
Verified Purchase
★★★★★
★★★★★
Chuck replacement made easy
The chuck arrived on time, fit perfectly, easy to replace with online video providing the how to.....saved $40 compared to what the Milwaukee shop wanted to charge for the repair.
Guest - December 3, 2019
Verified Purchase
★★★★★
★★★★★
Great parat exact
Works great A*
Guest - February 12, 2020
Verified Purchase
★★★★★
★★★★★
Milwaukee part
Get product, fit perfectly! Super fast shipping.
Guest - September 2, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
I use it for ice fishing
Guest - December 27, 2020
Verified Purchase
★★★★★
★★★★★
Perfect part, Easy repair
Arrived quickly and was easy to replace
Guest - January 4, 2021
Verified Purchase
★★★★★
★★★★★
The right part.
There was a lengthy delay due to manufacturer back order. I knew that when I ordered it. When the part was available eReplacement got it right out.
Guest - August 31, 2021
Verified Purchase
★★★★★
★★★★★
Great
You guys rock l enjoy doing business with you
Guest - January 14, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the old chuck and replaced it with the new one. The video on the website showed me a trick to \"pop\" the old one loose. Saved hundreds of dollars. I\'ve used Ereplacementparts.com before and will continue to use them. I run a shop that has about a dozen employees and we are pretty tough on tools.
Removed the chuck screw from the center of the chuck LH threads.
Inserted the largest allen wrench that would fit into the chuck. Insert the short end in the chuck. Tighten the chuck on the allen wrench. Lay the drill on its side and hit the allen wrench with a hammer to release it from the spindle. Then screw on the chuck hand tigh
... Read moret and replace the chuck screw.
1. Opened the old chuck completely with a set of pliers by securing the drill in a vise.
2.Note: Using the pliers pretty much destroys the old chuck.
3. Once open; using an impact driver and PHILLIPS screwdriver tip, I broke the screw loose inside the chuck. (left hand thread, so set your impact driver to tighten in order to l
... Read moreoosen). Removed screw.
4.Using the pliers, I was able to stick a large Allen Wrench in the chuck and tightened down on it. I then loosened the chuck spinning counter-clockwise and removed it from the drill.
5. I used the same Allen Wrench in the new chuck and tightened it on the drill.
6. I put a drop of locktite on the screw and used the impact driver to re-install, changing the driver direction to loosen in order to tighten the screw.
Done!
PS-Great website, easy to find parts for just about anything around the house you need to repair, definitely one of my \"go-to\" places!
Read less
Did you find this story helpful?
Thank you for voting!
Jaws of drill chuck out of round. Drills not drilling round hole.
1.Retracted drill jaws.
2. Removed left hand threaded screw holding chuck with screwdriver..
3. Tightened chuck onto large allen wrench.
4. Tapped allen wrench with hammer to loosen the chuck from drill..
5.Replaced with new chuck.
1 removed chuck screw left handed threads
2 chucked Allen wrench in chuck and broke chuck free and removed
3. Threaded new chuck on drill rechecked Allen wrench and tightens chuck on drill.
4. Installed new chuck screw.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP17016952
Manufacturer Part Number: 42-66-0023
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
