Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
17016251-1-M-DeWALT-NA146883-Magnet Ring
Part Location Diagram of NA146883 DeWALT Magnet Ring
See part 46 in the diagram
( Grid squares measure 1x1 inch )
17016251-1-S-DeWALT-NA146883-Magnet Ring 17016251-2-S-DeWALT-NA146883-Magnet Ring Part Location Diagram of NA146883 DeWALT Magnet Ring

Magnet Ring NA146883

Manufactured by:
DeWALT
ERP Number:
ERP17016251
Part Number:
NA146883
Original Equipment Manufacturer ?
  Works with your model  DCD930VX!
$46.15
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(3 rated repairs) ?
  Works with your model   DCD930VX!

Jump to:

Description Frequently Purchased Together Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This authentic OEM magnet ring is specifically designed for use with DeWALT drills and drivers. It fits between the baffle assembly and the armature assembly, playing a key role in the tool’s internal function. Made of durable metal, this part is sold individually and may require a screwdriver for installation. If the magnet ring becomes damaged or broken, it should be replaced to maintain proper tool performance. For accurate placement and installation, refer to your model’s manual and diagrams.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • DeWALT
This part works with the following products:
  • Hammer Drill
  • Hammer
  • Electric Drill
Part# NA146883 replaces these:
648124-00,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Burnt up. Magnetic ring seized to Armature

Loren from ROLLING PRAIRIE, Indiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
NA146883
Replaced Armature magnetic ring bearing holder
Did you find this story helpful?
Thank you for voting!

Motor wouldn\'t run

Dennis from DYERSBURG, Tennessee

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
NA146883, N031214, N023147SV
1. Took handle apart - motor within handle
2. Removed screws holding armature in place
3. Lifted out armature and magnet housing
4. Brushes mounted in frame slot - removed by hand
5. Reversed removal -
Make sure the new brushes are mounted in the frame; assure speed selector and magnetic housing ring are po sitioned to go together at same time after armature has been set, gear end of armature fits into gear housing.
Watch trigger wiring when installing brushes; could get pinched in fwd-reverse switch.
Read less
Did you find this story helpful?
Thank you for voting!

Motor burnt

joe from COVINGTON, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
NA146883, N031214, N023147SV
Remove4 screws that hold chuck and gear assembly
Remove remaining screws holding clamshell together
Separate clamshell and gear assembly may need to pry a little bit be sure all screws are removed
Once separated u will need to remove bearing cap screws then lift out mag ring armature and brush assembly
Assemble in reverse order being cautious of mag ring clocking it only goes in on way with notch on the end facing chuck
This repair can be frustrating but with any mechanical ability it can be done and was well worth it my dewalt hammer drill works like new
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP17016251
Manufacturer Part Number: NA146883
Brand Model Number Description
DeWALT DCD910KX Boring Machine - 12v Xrp Drill/Driver Kit
DeWALT DCD920 Cordless Drill - 14.4V Drill/Driver
DeWALT DCD920KX Electric Drill - 21131
DeWALT DCD930 Hammer Drill - 14.4V Hammer Drill
DeWALT DCD930KX Electric Drill - 21132
DeWALT DCD930KX-AR Hammer Drill - 14.4v Hmrdr/Drill/Driver
DeWALT DCD930KX-B2 Hammer Drill - 14.4v Hmrdr/Drill/Driver
DeWALT DCD930KX-BR Hammer Drill - 21132
DeWALT DCD930VX Electric Drill - 21132
DeWALT DCD940KX Cordless Drill - 18V XRP Drill/Driver Kit
DeWALT DCD950 Hammer Drill - 18V XRP Hammer Drill
DeWALT DCD950B Hammer Drill - 18V Hammer Drill
DeWALT DCD950KX Hammer Drill - 18V Hammer Drill
DeWALT DCD950KX-AR Hammer - 18v Xrp Hammerdrill/Drill
DeWALT DCD950KX-B2 Hammer - 18v Xrp Hammerdrill/Drill
DeWALT DCD950KX-BR Hammer - 18v Xrp Hammerdrill/Drill
DeWALT DCD950VX Hammer Drill - 18V Hammer Drill
DeWALT DCD970 Hammer Drill - 18V Hammer Drill
DeWALT DCD970KL Hammer Drill - 18V Hammer Drill
DeWALT DCD980L2 Cordless Drill - 20V Drill / Driver
DeWALT DCD980L2-AR Cordless Drill - 20V Max Premium Drill / Driver
DeWALT DCD980L2-B2 Boring Machine - 20v Max Premium Drill / D
DeWALT DCD980L2-BR Boring Machine - 20v Max Premium Drill / D
DeWALT DCD980M2 Boring Machine - 20v Drill
DeWALT DCD985B Hammer Drill - 20V Hammer Drill
DeWALT DCD985L2 Hammer Drill - 18V Hammer Drill
DeWALT DCD985L2-AR Hammer Drill - 20V Max Premium Hammer Drill
DeWALT DCD985L2-B2 Hammer Drill - 20V Max Premium Hammer Drill
DeWALT DCD985L2-BR Hammer Drill - 20V Max Premium Hammer Drill
DeWALT DCD985M2 Hammer - 20v Hammerdrill
Magnet Ring
$ 46.15
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖