O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. Of the many causes for O-Ring failure, the most common among power tools are: • <u>Extrusion and Nibbling</u> - The O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • <u>Abrasion</u> - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • <u>Over Compression </u> - The O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • <u>Heat Hardening</u> - The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • <u>Weather/Ozone Cracking</u> - The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
| Brand | Model Number | Description |
|---|---|---|
| Black and Decker | 5019 | Hammer Drill - Demolition Hammer |
| Black and Decker | 5019K | Hammer - Demolition Hammer |
| Black and Decker | 5093 | Hammer Drill - 1-1/2 SR Rotary Hammer |
| Black and Decker | 5093K | Electric Drill - 1-1/2 Sr Rot Hamr |
| Black and Decker | 5095 | Hammer Drill - 1-1/2 S Rotary Hammer |
| Black and Decker | 5095K | Hammer Drill - 1-1/2 S Rot.Hammr |
| Black and Decker | 5096 | Hammer Drill - 1-1/2 SE Rotary Hammer |
| Black and Decker | 5096K | Electric Drill - 1-1/2 Se Rot.Hamr |
| Black and Decker | 5097 | Hammer Drill - 1-1/2 ME Rotary Hammer |
| Black and Decker | 5097-220 | Hammer - 1-1/2 Rotary Hammer 220v |
| Black and Decker | 5097K | Electric Drill - 1-1/2 Me Rot.Hamr |
| Black and Decker | 5098 | Hammer Drill - 1-3/4 XSE Rotary Hammer |
| Black and Decker | 5098K | Electric Drill - 1-3/4 Xse Rot.Hmr |
| Black and Decker | 5099 | Hammer Drill - 1-3/4 XME Rotary Hammer |
| Black and Decker | 5099K | Electric Drill - 1-3/4 Xme Rot.Hmr |
| DeWALT | D25413K | Hammer - 1-1/8 Rotary Hammer |
| DeWALT | D25414KT-AR | Electric Drill - 4kg Sds-Plus Std Feat Com |
| DeWALT | D25414KT-B2 | Electric Drill - 4kg Sds-Plus Std Feat Com |
| DeWALT | D25414KT-B3 | Electric Drill - 4kg Sds-Plus Std Feat Com |
| DeWALT | D25415K | Hammer - 32mm Rotary Hammer |
| DeWALT | D25416K | Impact Driver - 1-1/8 Comb Ham E-Clu |
| DeWALT | D25417KT-AR | Hammer Drill - Rotary Hammer Drill |
| DeWALT | D25417KT-B2 | Hammer Drill - Rotary Hammer Drill |
| DeWALT | D25417KT-B3 | Hammer Drill - Rotary Hammer Drill |
| DeWALT | D25481K | Hammer - 1-9/16 Combo Hammer |
| DeWALT | D25481K-AR | Hammer Drill - 35mm Sds Max Combi |
| DeWALT | D25481K-B2 | Hammer Drill - 35mm Sds Max Combi |
| DeWALT | D25481K-B3 | Hammer Drill - 35mm Sds Max Combi |
| DeWALT | D25481K-BR | Hammer Drill - 35mm Sds Max Combo |
| DeWALT | D25500 | Hammer Drill - SDS Rotary Hammer |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
