Remove the screw from one side of the housing
Try to keep as many part in one half as you can, for the others that have to be removed take pictures of where the are.
Remove the old brush plate
Install the new brush plate
Install all of the parts
Screw the housings together
<
... Read morebr />
I disassembled the drill and removed the assembly. Then removed the brush plate, cleaned the armature on the brush end with fine sand paper. Looked up the brush plate on line at e replacement parts.com by giving them the model no. I was real careful to watch every step to remove the parts then reinstall it in reverse from disassembly.
Read less
Did you find this story helpful?
Thank you for voting!
Drill would not run in forward, only in reverse - brush plate slightly melted around one brush
1. Opened cased with torx driver
2. Split case open
3. Removed spade clip from outside brush
4. Removed stator, armature, hammer device, gear train, and chuck as one assembly
5. Removed stator from above assembly
6. Removed 2 screws holding brush holder to stator
7. Removed old brush holder
8. In
... Read morestalled new brush holder with 2 screws
9. Released brushes with small screwdriver
10. Installed both brush wires, and re-assembled stator, armature, gear train, and chuck
11. Installed removed case half
12. Test run - success
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19508870
Manufacturer Part Number: 2604337061
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 2604337061 Bosch Tool BRUSH PLATE")
_WW_1.gif "Part Location Diagram of 2604337061 Bosch Tool BRUSH PLATE")
