Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Side grinder switch
Switch was brand new, prompt delivery, fit as expected, grinding once again.
Guest - November 12, 2019
Verified Purchase
★★★★★
★★★★★
Excellent ordered on phone friendly knowledge service received product in days thx guys
Excellent condition when received used service many times satisfied
Guest - January 4, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair after I watched the utube video link provided by ereplacement parts.com
Correct part first time, got here on time, and grinder back up to running, used it to make money that day. Thanks for the help. Turns out it was cheaper route and quicker then paying shipping for my warranty repair.
Guest - February 12, 2020
Verified Purchase
★★★★★
★★★★★
fits perfect great service
great condition thanks
Guest - March 20, 2020
Verified Purchase
★★★★★
★★★★★
This site has saved my a$$
I'm a DIY kinda guy. So when my tools break at work, I'd rather try and repair them myself, then just buy a new one. Finding this site has saved me close to $300 so far just in repairing 2 tools. Thanks guys!!
Guest - April 9, 2020
Verified Purchase
★★★★★
★★★★★
Makiita grinder switch
Easy to use website, great exploded views of parts and fair prices. I’ve bought several parts over the year’s and they always take care of the problem.
Guest - August 21, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair, worked as expected
Arrived quickly and fits perfectly
Guest - February 24, 2021
Verified Purchase
★★★★★
★★★★★
Super easy repair
Perfect part and fit and super fast shipping!
Richard - April 16, 2021
Verified Purchase
★★★★★
★★★★★
Great quick service
Would always check them first for parts
Guest - April 4, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the rear motor housing shell.
2. Slid the plastic switch lever out of the main motor housing.
3. Cleaned the switch lever chanel with pipe cleaner.
4. Inserted the compression spring in the switch lever.
5. Lubed the switch lever with a silicon gel.
6. Inserted the switch lever into the main motor
... Read more housing.
7. Pressed the power switch button into the switch lever.
8. Attached the rear motor housing.
9. Finished the grinding job that I started 4 days before when the switch broke.
Removed the screws holding the grinder head on and the screw holding the back piece to the main body then just pulled the grinder apart. Replaced the switch parts and reversed the disassembly procedure. Only concern was holding the brushes away from the armature.
Unscrew angle head from grinder with 4 Phillips head screws, remove plastic housing between motor and head by 2 long screws, remove one phillips head screw on cord end to let the motor slide upward, insert new trigger from outside and slide inner switch connecting rod upward to connect the new outer trigger piece. ensure parts are locked
... Read morein together at small square, reinsert into housing and install bottom screw near cord, reinstall plastic insert over motor housing with two long screws, reattach angle head with 4 screws.
Grinder would not start disassembled end cap and slide , moved switch by hand several times , plugged it in and moved switch assembly by hand and grinder worked, inspected switch button and noticed button was worn at the section that make contact with the switch assembly. Ordered new button , replaced it . Works once again.
Bob W.
... Read more Watersound Fl. .
Read less
Did you find this story helpful?
Thank you for voting!
Lost switch button in heavy debris (long story as to how I caused this)
Using phillips screw driver, remove the black housing cover at the end of the grinder where the electrical cord is located.
Locate the black plastic piece that is the mechanism that turns on/off the grinder (it slides and is spring loaded).
Push the mechanism up, and in turn you will see where the switch is located the \'notch
... Read more\' becomes accessible. This is the ON position.
While holding mechanism up in the ON position, insert new switch so the switch \'hook\' goes into the mechanism \'notch\'
Release mechanism while holding switch into position.
Re-attached black housing cover.
Boom goes the Dynamite!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10150875
Manufacturer Part Number: 419566-3
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
