Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
Install
videos!
10141886-1-M-Makita-213445-5-O-ring 26
Part Location Diagram of 213445-5 Makita O-ring 26
See part 9 in the diagram
Replacing your Makita Grinder O-ring 26
10141886-1-S-Makita-213445-5-O-ring 26 360 view
( Grid squares measure 1x1 inch )
10141886-1-S-Makita-213445-5-O-ring 26 10141886-2-S-Makita-213445-5-O-ring 26 10141886-1-S-Makita-213445-5-O-ring 26 360 view
Part Location Diagram of 213445-5 Makita O-ring 26 Replacing your Makita Grinder O-ring 26

O-ring 26 213445-5

Manufactured by:
Makita
ERP Number:
ERP10141886
Part Number:
213445-5
Original Equipment Manufacturer ?
  Works with your model  9557NB2!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(3 rated repairs) ?
  Works with your model   9557NB2!

Jump to:

Description Frequently Purchased Together Troubleshooting Repair Videos Repair Instructions Model Cross Reference

Product Description

?

This is a genuine Makita replacement part that has been sourced from the original manufacturer to be used with angle grinders and die grinders. The o-ring is commonly used to seat and support the drive gear bearing assembly. This item is sold as an individual replacement part.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Grinder
  • Angle Grinder
  • Saw
  • Planer Jointer
  • Die Grinder

Videos For installing this part.

?
Replacing your O-ring 26

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Grinder was intermittently bogging down.

GREG from OAKLAND, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
213445-5, 210042-8
Remove 4 gearbox mounting screws, gearbox will simply fall off. Use impact to remove pinion gear. Use small gear puller or hammer to remove motor end plate from motor shaft. Pop bearing out of plate. Install new bearing, reverse of removal.
Did you find this story helpful?
Thank you for voting!

Front bearing was bad, making lots of noise and RPM\'s were half the normal speed

Gary from Bessemer, Michigan

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
213445-5, 210042-8
Pulled front bearing off with small bearing puller. Decided to replace rear pulley also. Had to cut rear pulley with Dremel cut-off wheel. Used sockets to tap bearings back on shafts and replaced rubber O ring around the front bearing.
Did you find this story helpful?
Thank you for voting!

I had a stripped drive gear on a Makita Grinder.

Edward from CORPUS CHRISTI, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
227542-1, 227541-3, 267794-2, 213622-9, 213445-5, 961052-5
I used the Exploded view provided for locating the parts needed for my repair. The assembly went smoothly. The grinder works great. All parts fit with out modification.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10141886
Manufacturer Part Number: 213445-5
Brand Model Number Description
Makita 4100KB Saw - Saw
Makita 4100NH2ZX Saw - Saw
Makita 4100NH2ZX1 Saw - Saw
Makita 4100NH3ZX Saw - Saw
Makita 4100NSZX Saw - Saw
Makita 4100NSZX1 Saw - Saw
Makita 9553B Grinder - Grinder
Makita 9553NB Angle Grinder - Angle Grinder
Makita 9553NBK Grinder - Grinder
Makita 9554NB Angle Grinder - Angle Grinder
Makita 9554NBK Grinder - Grinder
Makita 9555NB Grinder - Grinder
Makita 9555NBK Grinder - Grinder
Makita 9557NB Angle Grinder - Angle Grinder
Makita 9557NB2 Grinder - Grinder
Makita 9557PB Angle Grinder - Angle Grinder
Makita 9557PBX1 Grinder - Grinder
Makita 9558HN Grinder - Grinder
Makita 9558NB Angle Grinder - Angle Grinder
Makita 9558PB Angle Grinder - Angle Grinder
Makita BGA450Z Grinder - Grinder
Makita BGA452 Angle Grinder - Angle Grinder
Makita BGA452F Grinder - Grinder
Makita BGA452Z Angle Grinder - 18V LXT Lithium-Ion Cordless 4-1/2" Cut-Off/Angle Grinder
Makita BO6050J Sander - Sander
Makita GA4030 Angle Grinder - 4" Angle Grinder
Makita GA4030K Angle Grinder - 4&#34 Angle Grinder
Makita GA4530 Angle Grinder - 4-1/2&#34 Angle Grinder
Makita GA4530X Grinder - Grinder
Makita GA4534 Angle Grinder - Paddle Switch Angle Grinder
O-ring 26
$ 6.16
In Stock
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖