This is an OEM part sourced directly from the manufacturer. The bearing is designed for use in Black & Decker angle grinders. This part is made of metal, and is used to allow the spindle to move freely. You will require a screwdriver when replacing this part. This item is sold individually.
Troubleshooting
This part works with the following brands:
Black and Decker
Stanley
Porter Cable
This part works with the following products:
Grinder
Angle Grinder
Part# 596395-00 replaces these:
596395-00,
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dust cover was torn, rear bearing was bad, drill made a grinding noise when it was running.
Removed screws from dill housing, separated housing, removed motor, used puller to press out motor shaft from bearing, pressed on new bearing to motor shaft, installed motor back inside drill housing, removed trigger from housing, removed torn dust cover from trigger, installed new dust cover on to trigger, installed trigger back in to dr
... Read moreill housing, assembled drill housing together, installed screws, plugged in drill runs like new with no noise.
Remove the grinding wheel, inner and outer flanges, guard flange, guard, spring washer, and gear case cover. If you\'re lucky the bearing will come out with the gearcase cover. If not, it will have to be removed from the spindle. You can use a bearing puller a bearing separator. Or if you know some one that has a press you can use that t
... Read moreo. Remove the old bearing and press on the new bearing. Then install all of the parts that you removed.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10180671
Manufacturer Part Number: 596395-00
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
