This is a genuine item that is supplied directly from the original equipment manufacturer for use with Weber grills. It is an identical replacement for a missing or damaged bottom panel for 4 burner that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.
1 Unbolt & Remover rusted panes
2 Unbolt & Remover rusted Burner
3 Remover orifice for burner
4 Clean grill with paint scraper, grill cleaner , stainless steel cleaner & Trim & plastic restorer
5 Clean all orifice with a tip cleaner
6 Install new Panes
7 Install new Burner & orifice
The grill is
... Read morenow like new the total cost of about $300 & now has a value of $2,900
Thanks to your company ability to get the parts I needed.
Read less
Did you find this story helpful?
Thank you for voting!
The underlying frame of Webber grills is flimsy and will rust out within a few years. The bottom panel was not supporting the side panels any longer and had to be replaced.
0. Remove all \"junk\" inside the cabinet in addition to the tank.
1. Remove the grills and flavor bars.
2. Unscrew the two screws that hold the drip pan housing to the bottom panel you are replacing.
3. Tape/rubber band the cabinet doors together so they wouldn\'t open when I tipped the forward.
4. Put a piece of
... Read morecardboard in front of the grill so the decking wouldn\'t get damaged.
5. Locked the casters then leaned the grill forward; don\'t lower it by grabbing the cover handle it will open and you\'ll most likely drop the grill forward... I grabbed the front of the shelves and lowered it till it was laying face down.
6. Remove six bolts with 7/16\" socket. Push panel in on one side and it will enable you to pull it out through the bottom.
7. Replace the retaining nuts (6), the drip pan frame plastic anchor nuts, and reinsert the bottom plate.
8. Replace the new bolts and tighten firmly (don\'t over tighten).
9. Lift the grill upright and remove the tape holding the cabinet doors shut.
10. Screw the drip pan frame screws into the new plastic holding nuts in the bottom panel.
11. Replace tank, flavor bars, and grills.
12. Fire it up!
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 91319 Weber Bottom Panel For 4 Burner")
_WW_1.gif "Part Location Diagram of 91319 Weber Bottom Panel For 4 Burner")
