Part Location Diagram of 86821 Weber Lid Lock Support, 18.5"
See part 10 in the diagram
( Grid squares measure 1x1 inch )

Lid Lock Support, 18.5" 86821

Manufactured by:
Weber
ERP Number:
ERP10512460
Part Number:
86821
Original Equipment Manufacturer ?
  Works with your model  51004!
$9.74
Special Order

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   51004!

Troubleshooting

This part works with the following brands:
  • Weber
This part works with the following products:
  • Grill

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Needed to replace one-touch ash sweepers / upgraded ash pan and added a lid lock bale.

Whit from Portland, Oregon

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
86824, 86821, 63070
1. Removed remaining pieces of ash sweep system and cut off bolt assembly with dremel.
2. Tapped out remaining chunk of rusted sweeper.
3. Cleaned up kettle of ash and carbon deposits
4. Installed new ash sweeps (no tools needed)
5. Added a One-Touch Gold ash pan
6. Measured to find center of kettle for lid lock support, marked with pen
7. Measured to find mid points of kettle for lid bale. Lid wire holes should be 4\" from top of kettle bottom.
8. Drilled holes for lid wire bale and lock.
9. Inserted lid lock and wire bale.
10. Regular Weber 18.5\" grill converted to a lockable carry version.
Did you find this story helpful?
Thank you for voting!

Missing Lid support Bracket

Jeff from Arnold, Missouri

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
86821
1. Removed the Cook and Charcoal grate
2. Unscrewed the wingnut on the appropriate leg position.
3. Removed leg screw and washers.
4. Fed the screw thru the lid bracket and bowl
5. Tightened up the screw with the wingnut and screw driver.
6. Re-installed Grates.

For the record, it took longer t o write this review than it did do to the repair. It took less than 5 minutes
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10512460
Manufacturer Part Number: 86821
Brand Model Number Description
Weber 51001 Grill - Smokey Joe Gold/Platinum/Tuck-N-Carry Grill
Weber 51004 Grill - Smokey Joe Gold/Platinum/Tuck-N-Carry Grill
Weber 51020 Grill - Smokey Joe Gold/Platinum/Tuck-N-Carry Grill