Part Location Diagram of 85683 Weber Burner Assembly
See part A-28 in the diagram
( Grid squares measure 1x1 inch )

Burner Assembly 85683

Manufactured by:
Weber
ERP Number:
ERP10512409
Part Number:
85683
Original Equipment Manufacturer ?
  Works with your model  15501001!
$55.11
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?
  Works with your model   15501001!

Product Description

?

This is an original part from Weber. The burner assembly is composed of stainless steel, and is compatible with several outdoor grills. This item provides the ignition for lighting the charcoal. The assembly is approximately 11" in length, and includes the bracket, wires and hardware. The burner assembly is sold individually. A screwdriver and needle-nose pliers are needed for the installation.

Troubleshooting

This part works with the following brands:
  • Weber
This part works with the following products:
  • Grill

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Ignition wouldnGÇÖt spark

John from DENMARK, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
85683
Removed burner and ignition wires.
Replaced with new
Did you find this story helpful?
Thank you for voting!

Regulator was froze and other parts to gas system were in poor shape

Chris from CEDAR RAPIDS, Iowa

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
85683, 74237
Remove table from ôWeber Performerö by removing the 4 screws. Remove and retain the wire clip that secures the flexible gas line to the burn tube. Open the grill, remove the grates and close the bottom vent. Remove the igniter wires from the ignition switch and remove the 2 screws and nuts from the bracket holding the burn tube and rem ove whole assembly.

The regulator is mounted with 2 small slotted hex screws from the bottom. Prior to mounting the new regulator, start the new screws in the new regulator to check the treads or cut the threads in the holes. Reassembly is easy but you might want to use a wire or zip ties to keep hose and wires tucked away.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10512409
Manufacturer Part Number: 85683
Brand Model Number Description
Weber 1481001 Grill - Performer Platinum - Black
Weber 1482001 Grill - 22.5In. Performer Platinum-Copper
Weber 15501001 Grill - Performer Deluxe Blk (Us/Ca/Mx)