See part 13 in the diagram
( Grid squares measure 1x1 inch )
Charcoal Lid Handle Kit 80671
Manufactured by:
Weber
ERP Number: ERP10512045
Part Number: 80671
?
Delivers in 3-5 Business Days!
Product Description
?
Genuine Manufacturer Approved Gray Plastic Lid Handle for a Weber Grill. This includes the Handle and the Screw to attach it to the lid. Please Note: The part number for the handle with mounting bracket is 80672
Frequently Purchased Together
?
Troubleshooting
This part works with the following brands:
This part works with the following products:
Videos For installing this part.
?
★
Customer Part Reviews
?
Sort by:
Highest Rating
Most Recent
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
xxxxx
xxxxxxx
Guest - June 7, 2019
Verified Purchase
Perfect
Perfect! Just as ordered and arrived in three days!
Guest - July 24, 2019
Verified Purchase
Weber grill handle
This was a perfect replacement for the 25 year old wooden handle on my 18” Weber grill.
Guest - July 31, 2019
Verified Purchase
Smooth transaction
The part arrived fast and in good condition. It was easy to order fits great. Thanks!
Guest - November 5, 2019
Verified Purchase
Weber fireplace handles
These replaced the wooden handle perfectly. Very pleased with the results.
Guest - March 19, 2020
Verified Purchase
Perfect match...easy to install!
Replacement part worked perfectly on my kettle Weber, replacing the old wooden ones that had disintegrated over time.
Guest - July 7, 2020
Verified Purchase
right part great service too
it was shipped very fast
Guest - August 30, 2020
Verified Purchase
Fast service!
The part is factory new, the correct one and installed easily.
Guest - December 14, 2021
Verified Purchase
Lid handle
I need the part that attaches handle to lid
Judith - June 3, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask a question
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?
✖
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Sort by:
Most Helpful
Most Recent
Sorry, we couldn't find any existing installation instruction that matched.
Old wood handles rotted away
James from Grapevine, Texas
16 of 16 people
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers
No issues here - Updated plastic parts fit the older grills perfectly. Installing the new handle is very easy to put on the lid handle.
The handle on my weber grill was damaged during a wind storm when it blew over
Christopher from Barnhart, Missouri
5 of 5 people
found this instruction helpful.
Easy
Less than 15 mins
Pliers, Socket set
The handle replacement was simple 2 nuts on the inside of the lid hold the handle on. The wheels I used pliers to remove the retainer clips holding the old wheels on. Once the clips are removed the wheels slid off and the new wheels slid on I used a light hammer to set the new retainer clips and secure the new wheels. My grill looks brand
... Read more
NEW again!
Read less
The handles were weathered and the leg cap was missing.
Nelson from Dixon, California
4 of 4 people
found this instruction helpful.
A Bit Difficult
Less than 15 mins
Screw drivers
Used a screwdriver to undo the hardware holding the old handle, and used the screwdriver to mount the new handles. The leg cap just snaps into place.
Broken handle.
David from Gig Harbor, Washington
2 of 2 people
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers
Replaced with the new. Easy!
Old age
Robert from Granbury, Texas
2 of 2 people
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers
Very simple, just assemble handle kit to the metal handle on top of the lid. Then just replace the thermometer.
Broken handle.
mike from Surprise, Arizona
1 person
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers
Replaced with the new. Easy!
Parts mising when purchased
Bryan from Fresno, California
1 person
found this instruction helpful.
Easy
15 - 30 mins
Screw drivers, Wrench (Adjustable)
Had the old wooden handle which was rotting
Donald from Theodosia, Missouri
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers
Removed the old wooden handle and simply placed the new two piece plastic handle over the metal bracket and screwed it together
BBQ grill handle
Cheryl from St. Louis, Missouri
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers
Used a screw driver and was done in 10 minutes.
The handle broke due to something fell on it was just dumb luck on that one
Corey from Oak view , California
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Screw drivers
Nothing special just remove 2 screws and took old part off and put new one on
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Grill","title":"Grill","url":"/parts/bbq/grill/"},{"position":2,"name":"Handle","title":"Handle","url":"/parts/bbq/grill/handles/"},{"position":3,"name":"80671","title":"80671","url":""}]
