This is an authentic Weber replacement part used with some Performer grills. This assembly is used to connect the fuel tank to the burner tube. A Phillip's head screwdriver, flathead screwdriver, and pair of pliers are needed for this repair. This part does include installation instructions which are also available on Weber's website.
Troubleshooting
This part works with the following brands:
Weber
This part works with the following products:
Grill
Videos For installing this part.
?
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I followed the printed instructions that came with each package of parts. All it took to do the job was simple tools and a little time. You start by lifting out the charcoal bin and then removing the tabletop (4 screws). With that done all other parts are exposed and easy to get at.
Overall I was quite impressed with the
... Read morequality of the materials and the step by step instructions. Problems solved!!!!!!!!
I thank \"Ereplacement parts\" for quality parts and fast service.
1. Removed and replaced the one touch cleaning system.
2. Removed the side work surface.
3. Screws and bolts had seized over the last 10 years of use. The screw heads had to be ground off with a hand held grinder to remove the flame tube from the kettle.
4. Replaced parts connected the propane supply, pressed the igniter
... Read more and my grill was good as new.
Thank you for the great replacement parts so that i can continue to enjoy my Weber Performer Series grill for another decade.
1st, I used a pair of pliers to remove the clip holding the hose to the burner tube, don\'t lose the clip, you\'ll need to reuse it for the new regulator.
2nd, I removed the two screws holding the regulator and removed it
3rd, Reversed the sequence to install the new regulator
This was a very easy repair.
1. Remove work table (four screws)
2. Removed clip to disconnect gas line from burner (save the clip)
3. Removed two screws holding regulator to frame using nut driver
4. Started and then removed the two self tapping screws to establish threads
5. Installed regulator using the screws and nut driver
6. Connect
... Read moreed gas line to burner using clip.
7. Tested for function
8. Re-installed work table.
Note: Connection on hose at burner is right angle necessitating \'S\' Bend. Old hose had straight connection. Installed a zip tie to support new hose and eliminate downward twist.
Disconnected gas line from propane tank
Removed old regulator using nut driver to remove two screws
Removed clip holding orifice
Replaced regulator
Replaced clip
Done
If you follow the instructions sent with the part it will take much longer than indicated. The screws holding the regulator can be
... Read morereached from underneath, you have to work by feel but it isn\'t difficult using a 1/4 in. nutdriver or socket.
Purchased new regulator assembly, it came with instructions on how to replace the part. Easy to follow, except never had to detach/reattach the wiring as stated in the instructions. Now I have a functioning knob!
Took the top off the grill
Removed the charcoal bin
Removed the regulator and ignition switch
Replaced both and reassembled.
Like new again
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 74237 Weber Regulator Assembly")
_WW_1.gif "Part Location Diagram of 74237 Weber Regulator Assembly")
