Genuine Manufacturer Sourced locking caster with insert to work with Weber Grills. This is a Plastic part with a Metal Shaft. Caster features the wheel locking mechanism. This caster wheel helps you keep your unit mobile for easy transportation and locking mechanism will keep it steady in place while in operation.
The instructions say to block up the grill. However being I had everything removed from the grill ( propane tank, grate, tray, etc.) for a thorough cleaning, I just had my wife tilt the grill so that I could have access to the legs so as to replace the casters. With a rubber mallet gently hammered in the plastic inserts and then push
... Read moreed in the casters by hand pressure.
Read less
Did you find this story helpful?
Thank you for voting!
Replacing caster wheels on a outdoor Weber gas grill.
The easiest way is to lay your grill on its back, then you can easily access the caster wheels. First disconnect the propane tank and remove it from the grill. Then remove the grilles, dripping pan, and everything that might fall off when you lay it on its back.
Once it\'s laying down remove the old caster wheels by simply wiggling
... Read moreit while pulling out steady. you don\'t need any tools. They will slowly but surely come off one by one. Then just push the new caster wheels in until they snap in place. And that\'s all :).
Put one end of the grill on a wooden block between the wheels. Grab the wheel from the underside so the wheel sticks out from the grill and hit it downwards with the rubber mallet to remove the old insert and wheel. Place the new insert in the frame and tap it into place. Insert the wheel and push till it clicks in place. Repeat for all w
... Read moreheels to be replaced.
Removed old casters and replaced them with the new ones.
First one was most difficult. Once I figured best method for removal( tap screwdriver into collar seam with hammer), the other three went quickly. Installing new ones very easy.
Did you find this story helpful?
Thank you for voting!
Grill is 10 years old and the rubber on the wheels was shot.
Removed the grates, drip pans, and trap. Removed the old flavorizer bars and dials. Removed the two manifold cover screws, removed the cover. Removed the manifold bolt, and pulled the manifold away. Removed the old burner tubes. Cleaned the drip areas, installed new burner tubes, reinstalled manifold, manifold cover, dials, installed new
... Read moreflavorizer bars, reinstalled grates.
Tested burners. Worked like new.
Placed one side of grill on milk crate, pulled old casters, reinstalled new, and repeated process for other side.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 70360 Weber Locking Caster With Insert")
_WW_1.gif "Part Location Diagram of 70360 Weber Locking Caster With Insert")
